SOLAR FIELDS - SOLAR SERDAR (CCRES)

Siemens Solar Fields

promoted by

Croatian Center of Renewable Energy Sources (CCRES)

1. Solar energy is concentrated by the mirrors onto the receivers. Solar collectors rotate to maximize the capture of solar energy
2. Heat transfer fluid (HTF) is circulated and heated through the solar field loops. Cooled HTF returns for reuse
3. Oil pumps circulate the oil through the solar field
4. Heat exchangers forward the thermal energy from the HTF system to the water/steam (W/S) system
5. The W/S cycle transfers the thermal energy from the heat exchangers to the steam turbine
6. The steam turbine converts thermal energy to electric power
7. The cooling tower cools the water cycle
8. Clean power is delivered to the end users via the power grid
9. Central control optimizes solar power plant operations.
More info at http://solarserdar.blogspot.com/

Solar fields generate clean, carbon-free, renewable energy from an endless resource. They contribute to a more sustainable and ecologically sound power generation landscape. However, like any other power generation project, solar fields are, first and foremost, expected to perform at maximum levels and generate revenue. That is why they must prove their inherent financial feasibility before implementation.

However, sound project planning can easily become problematic due to the technical complexity of a solar field. If all of the critical solar components are delivered from multiple sources and providers, both delivery and performance risk can increase.

The SunField LP from Siemens is a groundbreaking solar field concept designed to address these issues. Its vertically integrated concept can help reduce project risks and reduce costs considerably for both investors and EPCs. It can enable more precise cost control, performance optimization of the entire trough, streamlined construction and an outstanding degree of electrical production at an excellent price/performance ratio.

Siemens manufactures and supplies all of the relevant solar field components, from solar receivers to parabolic reflectors and solar collector assemblies (SCA). As a single source supplier for an entire solar field, Siemens takes advantage of its decades of research and development in solar power, as well as its significant experience in testing, calibrating and optimizing parabolic trough performance.

The result is a reliable, highly efficient solar field solution based on commercially proven technology. As such, the SunField LP can suit investors’ and EPCs’ operational and financial models and promote bankability.More info at http://solarserdar.wordpress.com/

A solar field collects sunshine, concentrates it, converts it into thermal heat, and, finally, into electrical power. While this working principle may seem simple, it requires precise engineering and thorough research and development efforts to optimize the energy yield of the solar fields and turn solar power generation into an environmentally and economically beneficial option.

The SunField LP builds upon Siemens’ long-standing engineering experience with solar fields, as well as decades of on-site testing and integration at the commercially operational solar thermal facilities in California and various test facilities. Through many years of experience and modeling, Siemens has developed optimized solar field sizes and configurations. All key components of the Siemens SunField LP are precisely harmonized and coordinated with one another in order to obtain highest efficiency.
More info at http://solarserdar.blogspot.com/

The SunField LP package also includes important planning elements, including solar field design and engineering and design coordination. In addition, Siemens also offers power plant operations and maintenance services to help maximize the operational integrity of the SunField LP.

The basic component of the SunField LP solar field is the Siemens solar collector assemblies (SCA), a metal parabolic framework designed to hold the receiver and reflector panels in place and keep them perfectly aligned.

Line-based production for all components and processes, rather than the project-based approach employed by other providers, helps provide the Siemens SCA with the high accuracies necessary for optimal electricity production,and can enable fast and simple assembly and installation.

The SCA includes the latest advances in high torsion stiffness, vibration damping, high stiffness against bending, and corrosion resistance. These advances are important for consistent maximum optical efficiency. A hydraulic drive pylon and control system enable the SCA to precisely track the sun over the entire course of the day.

The parabolic reflector panels are made up of hot-formed mirrored glass panels supported by a truss system that gives the solar collector assembly its structural strength. To increase the transmissivity for solar radiation, the reflecting panels with their silver-based mirror coating are made of special glass with a particularly low iron content. The reflector panels need to be built to the highest standards of precision and durability, as even the slightest degradation can potentially impair the overall efficiency of the power plant.More info at http://solarserdar.wordpress.com/

The UVAC 2010 is designed for extremely low heat loss and high transmissivity. It is characterized by its superior thermal efficiency, which helps significantly increase the electrical output of a solar power plant. Its optical and thermal properties provide for outstanding heat creation compared to other available receivers.

The UVAC 2010 is composed of a selectively coated stainless steel tube within an anti-reflective evacuated glass tube. The UVAC 2010 includes Siemens’ patented vacuum maintenance unit and the anti-”fluorescent phenomenon” coating, designed to provide stable performance over time, even under extreme conditions.

A specially designed, advanced field control system assures the efficient collection of solar radiation. At the core of this system is a specialized sun position sensor. It enables precise tracking and focus of the sun’s rays onto the UVAC, and periodically sends commands to a drive system designed to position the SCA for optimal effect. The control system consists of local microprocessor controllers on each SCA and a field supervisory controller in the central control building, where the operators monitor the status of each SCA and all operational values, including solar insolation, wind velocity and HTF temperature. An interactive user interface contributes to the system for userfriendliness and responsiveness.More info at http://solarserdar.blogspot.com/

Siemens has designed a complex solar field operational model to complement the SunField LP. The model simulates the operating modes of the solar field, uses meteorological data to perform a heat balance calculation at certain time intervals throughout the year, and provides a calculated estimate of potential output over the lifetime of the power plant. Optical interaction factors, transient conditions, start-ups and changing weather conditions are all taken into consideration. The results are provided in terms of yearly and hourly values, and are verified and calibrated on the basis of results from various plants in operation.

For more information please contact Siemens Customer Support Center:

Phone: +49 (0)180 524 70 00

Fax: +49 (0)180 524 24 71

Siemens AG
Energy Sector

Freyeslebenstrasse 1
91058 Erlangen
Germany

support.energy@siemens.com

Croatian Center of Renewable Energy Sources (CCRES)

Željko Serdar
Head of business association
solarserdar@gmail.com

10 LARGEST SOLAR PV COMPANIES by CCRES

Croatian Center of Renewable Energy Sources (CCRES) promote 10 LARGEST SOLAR PV COMPANIES

Here are the top 10 producers of PV according to a report from Photon International, ranked by actual production. Total global shipments/installation of photovoltaic cells and modules was somewhere in the 7.5-8.5GW range with total production capacity exceeding 12.5GW.

The top 10 Solar PV manufacturers are:

1) 1100.0 MW First Solar

2) 704.0 MW Suntech

3) 595.0 MW Sharp

4) 586.0 MW Q-Cells

5) 525.3 MW Yingli

6) 520.0 MW JA Solar

7) 400.0 MW Kyocera

8) 399.0 MW Trina Solar

9) 397.0 MW SunPower

10) 368.0 MW Gintech

Thin films represented 16.8% of total global production, up from 12.5% .More info at http://solarserdar.blogspot.com/.
The top ten (thirteen - the last four are tied) thin-film producers were:

1) 1100.0 MW First Solar

2) 123.4 MW United Solar Ovonic

3) 94.0 MW Sharp

4) 60.0 MW Sunfilm1

5) 50.0 MW Trony

6) 43.0 MW Solar Frontier

7) 42.0 MW Mitsubishi

8) 40.0 MW Kaneka

9) 40.0 MW Moser Baer

10) 30.0 MW Würth Solar

11) 30.0 MW Bosch (formerly Ersol)

12) 30.0 MW EPV

13) 30.0 MW Solyndra

More info at http://solarserdar.wordpress.com/

Croatian Center of Renewable Energy Sources (CCRES)

Zeljko Serdar
Head of business association

solarserdar@gmail.com

SOLAR SERDAR recommends SOLAZYME

SOLAR SERDAR recommends Solazyme.Solazyme, Inc. is the leading renewable oil and bioproducts company. The company uses algal biotechnology to renewably produce clean fuels, chemicals, foods and health science products. Solazyme's advanced and proprietary technology uses algae to produce oils and biomaterials in standard fermentation facilities quickly, cleanly, cost effectively, and at large scale.

These natural oils and biomaterials are tailored, not only for fuel production, but also as replacements for fossil-derived petroleum and a variety of natural plant oils and compounds. This makes them useful in a wide range of products, from oleochemicals, to cosmetics, to foods.More info at solarserdar@gmail.com.

Founded in 2003 and headquartered in South San Francisco, Solazyme’s unique technology allows algae to produce oil and biomaterials in standard fermentation facilities quickly, efficiently and at large scale.

These natural oils and biomaterials are tailored not only for fuel production, but also as replacements for fossil-derived petroleum and a variety of natural plant oils and compounds, making them useful in a wide range of products: from oleochemicals, to cosmetics, to foods. Solazyme’s oils and fuels provide compelling solutions to increasingly complex issues of fuel scarcity, energy security and environmental impact while fitting cleanly into the pre-existing multi-trillion dollar fuel infrastructure.More info at http://solarserdar.blogspot.com/

Solazyme’s investors among others include Braemar Energy Ventures, Harris & Harris Group, Lightspeed Venture Partners, The Roda Group, and VantagePoint Venture Partners, and investors from strategic industry partners in key target markets.

Our unique, indirect photosynthesis bioproduction process uses microalgae to convert biomass directly into oil and other biomaterials, a process that can be performed in standard commercial fermentation facilities cleanly, quickly, and at low cost and large scale. Our renewable oil and bioproducts technology has manufactured thousands of gallons of oil and hundreds of tons of biomaterials that are tailored not only for biofuel production, but also as replacements for fossil petroleum and plant oils and compounds in a diverse range of products from oleochemicals to cosmetics and foods.More info at solarserdar@gmail.com.Billions of years of evolution have equipped algae with the capacity to produce oil by feeding on a wide variety of biomass. Solazyme’s technology is feedstock agnostic, which allows commercial scale production plants to be placed worldwide, adjacent to many non-food biomass sources and waste streams.

The long-term prospects for renewable oil production are excellent; businesses, environmental groups, policymakers and the public at large understand that there are larger and greater environmental and energy security needs driving the imperative for alternative sources of clean, domestically produced, high-quality oils.

Solazyme has produced a variety of renewable algal oil and materials based products including:

biodiesel that meets ASTM D6751, EN 14214, and U.S. Military specifications
renewable diesel that meets ASTM D975
renewable jet fuel that meets all 11 key tested criteria for ASTM D1655 (Jet-A1)
highly nutritious edible oils, flours, and powders
various oleochemicals
various consumer products including cosmetic and nutraceutical bioactives

Corporate and Partnering Inquiries
partnering@solazyme.com

Media Relations
Genet Garamendi
VP, Corporate Communications
650 963 5228 / main
press@solazyme.com

Solazyme, Inc.225 Gateway Blvd.
South San Francisco, California 94080
650 780 4777 / main
650 989 6700 / fax

Croatian Renewable Energy Center
SOLAR SERDAR
solarserdar@gmail.com

SOLAR SERDAR & U.S. GREEN BUILDING COUNCIL

SOLAR SERDAR & USGBC URGES SENATE TO PASS COMPREHENSIVE CLIMATE AND ENERGY POLICY
As the Senate takes up climate and energy legislation this year, the U.S. Green Building Council & SOLAR SERDAR urges Members to pass a comprehensive bill that will move us away from dependence on fossil fuels and toward a clean energy future.

GREEN BUILDINGS FOR CLIMATE PROTECTION
Buildings are part of the solution. While accounting for nearly 40% of our country’s carbon footprint, the building sector also serves as a low-cost, high-return investment strategy to reduce energy consumption and associated emissions, yet their potential remains largely untapped. McKinsey and Company estimates that increased efficiency would save the U.S. economy $130 billion per year, while reducing emissions by 1.1 gigatons a year. Moreover, programs dedicated to spur the retrofit of old, inefficient homes and buildings will create jobs and save consumers money.

For these reasons, USGBC & SOLAR SERDAR strongly urges the inclusion of the following measures in climate and energy legislation; most of which have significant bipartisan support:

EXISTING BUILDING RETROFITS. A residential and commercial green retrofit program, such as the Retrofit for Energy Efficiency Program (REEP) included in the Clean Jobs and American Power Act (S. 1733), or a combination of the Home Star Energy Retrofit Act of 2010 (S. 3434) and the Building Star Energy Efficiency Act of 2010 (S. 3079). These programs are estimated to create over 300,000 jobs over two years.

IMPROVED BUILDING CODES. A program to strengthen and enforce building energy codes, with efficiency targets that build upon those in the American Clean Energy Leadership Act (ACELA) and are increased incrementally over time. The adoption of codes with higher energy efficiency targets has the potential to save building owners in the U.S. over $4 billion per year in 2015, according to DOE.
More info at solarserdar@gmail.com

ENERGY PERFORMANCE DISCLOSURE. The creation of a national, voluntary program for effective benchmarking and disclosure of building energy performance for a diverse set of building types, such as what is already included in ACELA . In order to impact the 125 million existing buildings in America, the labeling program implementation should apply to existing building stock as well as new construction.

WATER EFFICIENCY. Authorization of a national program such as WaterSense to identify and promote water-efficient devices; authorization of federal procurement of such devises; and state incentive programs as described in S. 1733. According to the EPA, if one out of every 100 homes in the U.S. were retrofitted with water-efficient fixtures, we could save 100 million kWh of electricity per year—the GHG reduction equivalent of removing nearly 15,000 automobiles from the road.
Furthermore, legislation should contain aggressive national goals and funding for complimentary measures that 1) unlock efficiency and clean power such as an Energy Efficiency Resource Standard and a Renewable Electricity Standard; 2) reduce oil consumption, by promoting transportation efficiency and transit-orientated development; and 3) facilitate global emission reductions through international clean energy deployment and technology cooperation for developing countries.
More info at solarserdar@gmail.com

SOLAR SERDAR and USGBC urges the Senate to pass a comprehensive climate and energy package in 2010 that contains emission targets based on science, invests in a clean energy future and gives back to American communities. Investments in building efficiency now will create jobs, save money for consumers and businesses, reduce emissions, and unleash technology innovation.

For more information, contact Croatian Center of Renewable Energy Sources and
SOLAR SERDAR at solarserdar@gmail.com and
USGBC Advocacy Staff at publicpolicy@usgbc.org.

SOLAR SERDAR recommends SANYO Solar

SOLAR SERDAR recommends SANYO Solar

SANYO Solar is one of the most important international solar companies. For more than 30 years we have been setting standards for the development of new, innovative and high performance photovoltaic products. Because SANYO has focused on renewable energies technologies, we are significantly contributing to ensuring that the rising worldwide demand for energy can continue to be met in the future.

In Photovoltaics, the sun’s radiation energy is transformed into electric energy. This is accomplished by means of solar cells. As a rule, solar cells consist of the semiconductor silicon, which is particularly suitable for the manufacture of solar cells because of its high availability, low raw material costs and simple transformation. Semiconductors are substances that become electrically conductive when they are exposed to light or heat. Solar cells are essentially structured into two layers, where one layer is negatively charged and the other holds a positive charge. As soon as sunlight strikes the layers, a voltage tension develops between the two layers. This generates direct current within the solar cell. In order to be able to use this current, photovoltaic systems have a power inverter or AC converter. The inverter converts the direct current generated by the cells into alternating current, which can then be used for household purposes or to be fed into the public electricity grid.
There is much talk about Photovoltaics nowadays. It is one of the most important milestones when it comes to our future energy supply. Photovoltaic systems already hedge against the constantly rising costs of fossil fuels. Furthermore, they boost the value of a building and help to safeguard your retirement.

What are the advantages of solar energy and photovoltaic systems? We can provide several answers to this question:
Photovoltaic systems are government-sponsored
Photovoltaic systems frequently generate greater returns than a savings account or term deposit
Photovoltaic systems pay off even in low-light countries like Germany
Photovoltaic systems cut emissions of the climate killer CO2
Photovoltaic system prices are becoming increasingly competitive
Photovoltaic systems can be funded with favourable government credits
As in acquiring a solar system you are making a long-term and high value investment, the quality of the individual modules is determining. You should therefore choose a brand that will give you a definite reliability guarantee and which you can trust. SANYO has been one of the most innovating companies in solar technology for more than three decades, and has installed more than 1.2 million modules in Europe alone.

Our track record is the only way we can guarantee our customers onething: decades of trouble-free operation and constant high performance of our Modules. SANYO PV Modules are characterised by a particularly high degree of efficiency and robust quality. More info at solarserdar@gmail.com

Our Modules are certified by internationally renowned, independent testing bodies such as the TÜV Rheinland, and meet European standards. We will be happy to give you that assurance in writing together with our comprehensive service warranties.

Our goal is to provide you with a product that meets all your service and quality requirements and thatwill ultimately give you much more. SANYO Solar Modules have received many awards and are highly appreciated by professional installers.
Even if here we get a little more technical, if you would like to know more about modern solar cells and SANYO’s innovative HIT technology, it’s worth taking a closer look.
The HIT technology – Heterojunction with Intrinsic Thin Layer – is atrailblazing SANYO development. Our HIT Solar Cells consist of a thinsingle crystal Wafer coated with an ultrathin amorphous (i.e., noncrystal)Silicon layer.The surface loss frequently seen in solar cells is reduced, resulting in a high level of performance.More info at solarserdar@gmail.com
SANYO’s HIT Double® Modules generate solar electricity simultaneously on the front and on the back side. The back side of the Modules takes up environmental light reflected from surrounding surfaces. This additional amount of light is combined with the light taken up by the front side of the Module. As compared to our single-side HIT Modules,energy generation can be increased by up to 20% per square meter with the HIT Double® Modules by virtue of their special design. The HITDouble® by SANYO are also some of the highest performance modules currently available.
Use your roof as a small, ecologically valuable power station. Our examples show you how SANYO Solar Modules can be fitted to a building in many different and flexible ways. After the installation your electricity meter will show you how much you’re earning every day with your new SANYO solar system.More info at solarserdar@gmail.com
In many European countries it is also financially advantageous to build large photovoltaic plants and to sell the electricity thus generated at a profit. However, their design, construction and operation is more complex than is the case for home systems.

Thus e.g. meeting scheduled deadlines and managing the flow of financial resources as well as development and construction require special attention. For such projects we work with different partners specialising in the pertinent tasks on a Europe-wide basis.
SOLAR SERDAR
&
Croatian Center of Renewable Energy Sources
solarserdar@gmail.com

More info about SANYO Solar at :
http://sanyo.com/solar/

More info about Croatian Center of Renewable Energy Sources &
SOLAR SERDAR at:

http://solarserdar.blogspot.com

http://solarserdar.wordpress.com

SOLAR SERDAR - ELECTRICITY FROM THE SUN

CROATIAN CENTER of RENEWABLE ENERGY SOURCES



ELECTRICITY FROM THE SUN
Solar water heating can be used for heating hot water or swimming pools at home. One needs about four square meters of direct sunlight on the roof (southeast to south west) for the main part of the day for a domestic home system. Additional space will be required for a water cylinder system.

Choosing a system requires looking into a few factors- where the direct sunlight falls on the roof, the existing hot water system at home and your budget. If one lives in the colder part of North Carolina, there is also an indirect method where a non-toxic anti-freeze liquid is used. The sun warms this liquid which transfer the heat to water that is held in the tank. The heated liquid is brought from the solar collector to the water tank, where the pipes loop around the water heater to transfer their heat to the tank.

Movement of the liquid through either type of system can be either active or passive. An active system uses a pump. A passive system is based on the thermosiphon principle that water rises as it heats. As the solar thermal collector pipes heat up, they draw new liquid into the system. The pipes are laid at such an angle that if there is not enough heat to draw the liquid up, then it drains back down into the house. This prevents liquid from being in the pipes if they freeze.More info at solarserdar@gmail.com

During winter one will want to keep the propane heating system as a backup during mornings, evenings, and the coldest parts of winter. A two- tank system or a one-tank system can be used. In a two-tank system, the solar-heated water is first sent to the solar tank, then sent through the conventional water heater. In a one-tank system, the solar storage and backup heater are combined in one tank. Also, the propane heater should be adjusted so that it heats water only to up to the maximum degree it is required.

Locating A System - Some Tips
If a system is in the shade it will not work effectively, so first and foremost make sure that you have your system in the direct sunlight. This means throughout the day, some systems get great sun in the mid-day and are shaded all afternoon (try to avoid this). Secondly, make sure that your system is facing in the Southern direction for maximum efficiency.
Solar water heating systems usually cost more to purchase and install than conventional water heating systems. However, a solar water heater can usually save you money in the long run, and when installed in a new home can be cash flow positive from day one.More info at solarserdar@gmail.com

How much money you save depends on the following:

The amount of hot water you use
Your system's performance
Your geographic location and solar resource
Available financing and incentives
The cost of conventional fuels (natural gas, oil, and electricity)
The cost of the fuel you use for your backup water heating system, if you have one.
On average, if you install a solar water heater, your water heating bills should drop 50%–80%. Also, because the sun is free, you're protected from future fuel shortages and price hikes.More info at solarserdar@gmail.com

If you're building a new home or refinancing, the economics are even more attractive. Including the price of a solar water heater in a new 30-year mortgage usually amounts to between $13 and $20 per month. The federal income tax deduction for mortgage interest attributable to the solar system reduces that by about $3–$5 per month. So if your fuel savings are more than $15 per month, the solar investment is profitable immediately. On a monthly basis, you're saving more than you're paying.

According to the U.S. Department of Energy, using solar thermal technology will drop your water-heating bill an average of 50 to 80 percent. Additional benefits include protection from fuel shortages and price hikes and the benefit of contributing to the overall environment. In your neighborhood alone, switching to solar water heating will drastically reduce emissions caused by conventional systems.
Solar water heating operates at 80 percent efficiency. What’s more, solar water heating is simple, usually consisting of two or three rooftop collectors that direct sun-heated water to holding tanks that contain anywhere from 66 to 120 gallons of water.

Solar hot water heaters stand out as a reliable and cost effective renewable energy technology with significant near-term potential to meet energy needs in the residential, commercial and industrial sectors.

A typical solar hot water (or solar thermal) system in North Carolina can supply 50-80 percent of a household’s water heating needs using free, radiant energy from the sun. Such systems lead to significant cost savings over time, since homeowners spend on average $300 – or up to 25 percent of their energy bill – every year heating water.

Solar thermal costs more than conventional electric or natural gas-fueled water heaters – around $6,500 depending on whether it is installed in a new or existing home. However, North Carolina’s solar energy tax credits, which are among the most generous of any state in the county, can be used in combination with a federal tax credit to make solar thermal systems much more cost-competitive.More info at solarserdar@gmail.com

In today’s market, up-front costs for solar thermal systems are typically recovered through energy cost savings in about 10 years, a fraction of the system’s 20 to 30-year lifespan. If you include its cost in a 30-year mortgage for a new home, a solar thermal system can be purchased for around $16 per month, an expense that would be offset by the energy savings that the system provides. In addition, the energy savings provide a hedge against future uncertainty of energy prices.

The economics of solar thermal for commercial and institutional buildings is quite positive. A solar water heating system with 30 collectors would cost about $110,000. With federal tax credits, state tax credits, and depreciation, the net cost would only be about $18,500. The annual energy savings would be about $3,600. The energy savings would provide about a 19% annual return on investment.

The aggregate impact of widespread solar thermal adoption can be significant. If North Carolina’s solar thermal companies installed 35,000 residential systems and 500 commercial systems each year, the energy savings generated would be about 130 million kWh -- $11 million of savings annually. Assuming this level of installation could continue for 10 years, the energy savings would be approximately $110 million each year, a savings that would escalate over time as energy prices rise. The savings would be equivalent to avoiding combustion of 550,000 tons of coal each year.
Photovoltaic comes from the words photo meaning light and volt, a measurement of electricity. First used in about 1890, the word has two parts: photo, a stem derived from the Greek phos, which means light, and volt, a measurement unit named for Alessandro Volta (1745-1827), a pioneer in the study of electricity. Therefore, photovoltaic could literally be translated as light-electricity. That is exactly what photovoltaic materials and devices do; they convert light energy to electricity, as Edmond Becquerel and others discovered in the 18th Century.

Photovoltaic (PV), is a technology that converts light directly into electricity. Photovoltaic is the technology that uses light to convert it into electricity. A photovoltaic cell converts solar energy into electricity by the photovoltaic effect. More info at solarserdar@gmail.com

How can we get electricity from the sun?
A: When certain semiconducting materials, such as certain kinds of silicon, are exposed to sunlight, they release small amounts of electricity. This process is known as the photoelectric effect. The photoelectric effect refers to the emission, or ejection, of electrons from the surface of a metal in response to light. It is the basic physical process in which a solar electric or photovoltaic (PV) cell converts sunlight to electricity.

Sunlight is made up of photons, or particles of solar energy. Photons contain various amounts of energy, corresponding to the different wavelengths of the solar spectrum. When photons strike a PV cell, they may be reflected or absorbed, or they may pass right through. Only the absorbed photons generate electricity. When this happens, the energy of the photon is transferred to an electron in an atom of the PV cell (which is actually a semiconductor).

With its newfound energy, the electron escapes from its normal position in an atom of the semiconductor material and becomes part of the current in an electrical circuit. By leaving its position, the electron causes a hole to form. Special electrical properties of the PV cell—a built-in electric field—provide the voltage needed to drive the current through an external load (such as a light bulb).More info at solarserda@gmail.com

How long do photovoltaic (PV) systems last?
A: A PV system that is designed, installed, and maintained well will operate for more than 20 years. The basic PV module (interconnected, enclosed panel of PV cells) has no moving parts and can last more than 30 years. The best way to ensure and extend the life and effectiveness of your PV system is by having it installed and maintained properly.

Experience has shown that most problems occur because of poor or sloppy system installation. Failed connections, insufficient wire size, components not rated for dc application, and so on, are the main culprits. The next most common cause of problems is the failure of the electronic parts in the balance of systems (BOS): the controller, inverter, and protection components. Batteries fail quickly if they're used outside their operating specification. For most applications (uses), batteries should be fully recharged shortly after use. In many PV systems, batteries are discharged AND recharged slowly, perhaps over a period of days or weeks. Some batteries quickly fail under these conditions. Be sure the batteries specified for your system are appropriate for the application.More info at solarserdar@gmail.com

How much electricity does a photovoltaic (PV) system generate?
A: A 10% efficient PV system in most areas of the United States will generate about 180 kilowatt-hours per square meter. A PV system rated at 1 kilowatt will produce about 1800 kilowatt-hours a year. Most PV panels are warranted to last 20 years or more (perhaps as many as 30 years) and to degrade (lose efficiency) at a rate of less than 1% per year. Under these conditions, a PV system could generate close to 36,000 kilowatt-hours of electricity over 20 years and close to 54,000 kilowatt-hours over 30 years. This means that a PV system generates more than $10,000 worth of electricity over 30 years.
( Source: US department of energy: http://www.eere.energy.gov/solar/cfm/faqs/)

Indirect-circulation systems
As sun’s waves hit a photovoltaic cell it hits the electrons within layers of the cell. The electrons jump back and forth, creating electricity. This electricity is captured by wires running through the PV cells and sends out electricity. The electric current generated by PV cells is direct current (DC), and is the same current used in batteries. Most of the appliances in the United States run off of alternating current (AC), or the type of current that comes over power lines.More info at solarserdar@gmail.com

Why use a Photovoltaic system?
A residential PV power system enables a homeowner to generate some or all of their daily electrical energy demand on their own roof, exchanging daytime excess power for future energy needs (i.e. nighttime usage). The house remains connected to the electric utility at all times, so any power needed above what the solar system can produce is simply drawn from the utility.
A PV system reduces, or can completely eliminate, the amount of electricity you have to purchase from your utility or electric service provider. A PV system can save you money on your electricity bill and act as a hedge against future price increases. The electricity generated by your PV system is clean, renewable and reliable. You help your community by reducing the electricity demand and provide additional electricity for the grid when you generate more than you use during the day, when this demand is highest.
Solar heating is an affordable and cost-effective alternative for heating or cooling water or space in commercial and industrial buildings. More info at solarserdar@gmail.com

General Solar Heating Information
Solar process-heating systems are designed to meet the need for large quantities of hot water or space heating at commercial, industrial, and institutional buildings. A typical system consists of several thousand square feet of ground-mounted collectors, combined with pumps, heat exchangers, controls, and one or more large-volume storage tanks. Solar process-heating systems have successfully developed niche markets in federal and state governments. Such facilities might include schools, military bases, office buildings, and prisons that provide hot water for bathing, cooking, laundry, and space heating.More info at solarserdar@gmail.com

What does solar water heating look like?
The roof collectors look like skylights that integrate well with rooflines. Flat plate collectors are most common, available in sleek black colors.


Solar Water Heating
One of the most cost-effective ways to include renewable technologies into a building is by incorporating solar hot water. The Housing and Urban Development’s Partnership for Advancing Technology in Housing Program named solar water heating one of the top 10 technologies for 2007!

A typical residential solar water-heating system reduces the need for conventional water heating by about two-thirds. It minimizes the expense of electricity or fossil fuel to heat the water and reduces the associated environmental impacts.


Solar Water Heating for Buildings
Most solar water-heating systems for buildings have two main parts: (1) a solar collector and (2) a storage tank. The most common collector used in solar hot water systems is the flat-plate collector.
Solar water heaters use the sun to heat either water or a heat-transfer fluid in the collector. Heated water is then held in the storage tank ready for use, with a conventional system providing additional heating as necessary. The tank can be a modified standard water heater, but it is usually larger and very well insulated. Solar water heating systems can be either active or passive, but the most common are active systems.

Active solar water heaters
Active solar water heaters rely on electric pumps, and controllers to circulate water, or other heat-transfer fluids through the collectors. These are the three types of active solar water-heating systems:
Direct-circulation systems use pumps to circulate pressurized potable water directly through the collectors. These systems are appropriate in areas that do not freeze for long periods and do not have hard or acidic water. These systems are not approved by the Solar Rating & Certification Corporation (SRCC) if they use recirculation freeze protection (circulating warm tank water during freeze conditions) because that requires electrical power for the protection to be effective.


Indirect-circulation Systems
Indirect-circulation systems pump heat-transfer fluids through collectors. Heat exchangers transfer the heat from the fluid to the potable water. Some indirect systems have "overheat protection," which is a means to protect the collector and the glycol fluid from becoming super-heated when the load is low and the intensity of incoming solar radiation is high. The two most common indirect systems are:
Antifreeze. The heat transfer fluid is usually a glycol-water mixture with the glycol concentration depending on the expected minimum temperature. The glycol is usually food-grade propylene glycol because it is non-toxic.


Drainback Systems
Drainback systems are a type of indirect system that uses pumps to circulate water through the collectors. The water in the collector loop drains into a reservoir tank when the pumps stop. This makes drainback systems a good choice in colder climates. Drainback systems must be carefully installed to assure that the piping always slopes downward, so that the water will completely drain from the piping. This can be difficult to achieve in some circumstances.

Passive solar water heaters
Passive solar water heaters rely on gravity and the tendency for water to naturally circulate as it is heated. Because they contain no electrical components, passive systems are generally more reliable, easier to maintain, and possibly have a longer work life than active systems. The two most popular types of passive systems are:
Integral-collector storage systems consist of one or more storage tanks placed in an insulated box with a glazed side facing the sun. These solar collectors are suited for areas where temperatures rarely go below freezing. They are also good in households with significant daytime and evening hot-water needs; but they do not work well in households with predominantly morning draws because they lose most of the collected energy overnight.

Thermosyphon Systems
Thermosyphon systems are an economical and reliable choice, especially in new homes. These systems rely on the natural convection of warm water rising to circulate water through the collectors and to the tank (located above the collector). As water in the solar collector heats, it becomes lighter and rises naturally into the tank above. Meanwhile, the cooler water flows down the pipes to the bottom of the collector, enhancing the circulation. Some manufacturers place the storage tank in the house's attic, concealing it from view. Indirect thermosyphons (that use a glycol fluid in the collector loop) can be installed in freeze-prone climates if the piping in the unconditioned space is adequately protected.
CROATIAN CENTER of RENEWABLE ENERGY SOURCES ( CCRES )

SOLAR SERDAR - CROATIAN CENTER of RENEWABLE ENERGY SOURCES

SOLAR SERDAR - CROATIAN CENTER of RENEWABLE ENERGY SOURCES

Energy Performance Ratings for Windows, Doors, and Skylights
You can use the energy performance ratings of windows, doors, and skylights to tell you their potential for gaining and losing heat, as well as transmitting sunlight into your home.

Heat Gain and Loss
Windows, doors, skylights can gain and lose heat in the following ways:

Direct conduction through the glass or glazing, frame, and/or door
The radiation of heat into a house (typically from the sun) and out of a house from room-temperature objects, such as people, furniture, and interior walls
Air leakage through and around them.
These properties can be measured and rated according to the following energy performance characteristics:

U-factor
The rate at which a window, door, or skylight conducts non-solar heat flow. It's usually expressed in units of Btu/hr-ft2-ºF. For windows, skylights, and glass doors, a U-factor may refer to just the glass or glazing alone. But National Fenestration Rating Council U-factor ratings represent the entire window performance, including frame and spacer material. The lower the U-factor, the more energy-efficient the window, door, or skylight.

Solar heat gain coefficient (SHGC)
A fraction of solar radiation admitted through a window, door, or skylight—either transmitted directly and/or absorbed, and subsequently released as heat inside a home. The lower the SHGC, the less solar heat it transmits and the greater its shading ability. A product with a high SHGC rating is more effective at collecting solar heat gain during the winter. A product with a low SHGC rating is more effective at reducing cooling loads during the summer by blocking heat gained from the sun. Therefore, what SHGC you need for a window, door, or skylight should be determined by such factors as your climate, orientation, and external shading. For more information about SHGC and windows, see passive solar window design at solarserdar.wordpress.com

Air leakage
The rate of air infiltration around a window, door, or skylight in the presence of a specific pressure difference across it. It's expressed in units of cubic feet per minute per square foot of frame area (cfm/ft2). A product with a low air leakage rating is tighter than one with a high air leakage rating.

Sunlight Transmittance
A window's, door's, or skylight's ability to transmit sunlight into a home can be measured and rated according to the following energy performance characteristics:

Visible transmittance (VT)
A fraction of the visible spectrum of sunlight (380 to 720 nanometers), weighted by the sensitivity of the human eye, that is transmitted through a window's, door's, or skylight's glazing. A product with a higher VT transmits more visible light. VT is expressed as a number between 0 and 1. The VT you need for a window, door, or skylight should be determined by your home's daylighting requirements and/or whether you need to reduce interior glare in a space.More info at solarserdar@gmail.com

Light-to-solar gain (LSG)
The ratio between the SHGC and VT. It provides a gauge of the relative efficiency of different glass or glazing types in transmitting daylight while blocking heat gains. The higher the number, the more light transmitted without adding excessive amounts of heat. This energy performance rating isn't always provided.

Energy Performance Testing, Certification and Labeling
The National Fenestration Rating Council (NFRC) operates a voluntary program that tests, certifies, and labels windows, doors, and skylights based on their energy performance ratings. The NFRC label provides a reliable way to determine a window's energy properties and to compare products.

The NFRC label can be found on all ENERGY STAR® qualified window, door, and skylight products, but ENERGY STAR bases its qualification only on U-factor and SHGC ratings.

See Learn More on the right side of this page (or below if you've printed it out) for links to NFRC and ENERGY STAR information.
Exterior Doors
An exterior door can contribute significantly to air leakage in a home—as well as some heat transfer—if it's old, not properly installed, and/or not properly air sealed. This can result in energy losses.
Daylighting
Daylighting is the use of windows and skylights to bring sunlight into your home.

Today's highly energy-efficient windows, as well as advances in lighting design, allow efficient use of windows to reduce the need for artificial lighting during daylight hours without causing heating or cooling problems.More info at solarserdar.wordpress.com

The best way to incorporate daylighting in your home depends on your climate and home's design. The sizes and locations of windows should be based on the cardinal directions rather than their effect on the street-side appearance of the house.

South-facing windows are most advantageous for daylighting and for moderating seasonal temperatures. They allow most winter sunlight into the home but little direct sun during the summer, especially when properly shaded.

North-facing windows are also advantageous for daylighting. They admit relatively even, natural light, producing little glare and almost no unwanted summer heat gain.

Although east- and west-facing windows provide good daylight penetration in the morning and evening, respectively, they should be limited. They may cause glare, admit a lot of heat during the summer when it is usually not wanted, and contribute little to solar heating during the winter.

If you're constructing a new house, you want to consider daylighting as part of your whole-house design—an approach for building an energy-efficient home.
Space Heating and Cooling
Heating and cooling account for about 56% of the energy use in a typical U.S. home, making it the largest energy expense for most homes. A wide variety of technologies are available for heating and cooling your home, and they achieve a wide range of efficiencies in converting their energy sources into useful heat or cool air for your home. In addition, many heating and cooling systems have certain supporting equipment in common, such as thermostats and ducts, which provide opportunities for saving energy.

When looking for ways to save energy in your home, be sure to think about not only improving your existing heating and cooling system, but also consider the energy efficiency of the supporting equipment and the possibility of either adding supplementary sources of heating or cooling or simply replacing your system altogether.

Selecting and Replacing Heating and Cooling Systems
When replacing or upgrading an existing heating and cooling system, it's important to first consider the limitations imposed by your current system and available energy sources. When selecting a heating and cooling system for a new house, your options are generally much wider, although your builder or developer may place limitations on your choices.More info at solarserdar@gmail.com

Cooling Systems
Depending on where you live, cooling your home can be as simple as opening a window or as complex as using a central air conditioning unit. A wide variety of cooling technologies are available.

Heating Systems
Although most U.S. homes use either a furnace or a boiler, other approaches range from wood stoves to active solar heating systems.

Heat Pump Systems
Heat pump systems provide both heating and cooling and offer the benefit of delivering more useful energy than they consume.

Supporting Equipment for Heating and Cooling Systems
Thermostats and ducts provide opportunities for saving energy. Dehumidifying heat pipes allow central air conditioners and heat pumps to deliver drier air. Electric and gas meters allow you to track your energy use closely.

CROATIAN CENTER of RENEWABLE ENERGY SOURCES and
SOLAR SERDAR
solarserdar@gmail.com

CCRES - TIPS for RENEWABLE

CROATIAN CENTER of RENEWABLE ENERGY SOURCES

TIPS for RENEWABLE

Heating and cooling your home uses more energy and drains more energy dollars than any other system in your home. Typically, 43% of your utility bill goes for heating and cooling. What's more, heating and cooling systems in the United States together emit 150 million tons of carbon dioxide into the atmosphere each year, adding to global climate change. They also generate about 12% of the nation's sulfur dioxide and 4% of the nitrogen oxides, the chief ingredients in acid rain.

No matter what kind of heating, ventilation, and air-conditioning system you have in your house, you can save money and increase your comfort by properly maintaining and upgrading your equipment. But remember, an energy-efficient furnace alone will not have as great an impact on your energy bills as using the whole-house approach. By combining proper equipment maintenance and upgrades with appropriate insulation, air sealing, and thermostat settings, you can cut your energy use for heating and cooling, and reduce environmental emissions, from 20% to 50%.

Heating and Cooling Tips
Set your thermostat as low as is comfortable in the winter and as high as is comfortable in the summer.

Clean or replace filters on furnaces once a month or as needed.

Clean warm-air registers, baseboard heaters, and radiators as needed; make sure they're not blocked by furniture, carpeting, or drapes.

Bleed trapped air from hot-water radiators once or twice a season; if in doubt about how to perform this task, call a professional.

Place heat-resistant radiator reflectors between exterior walls and the radiators.

Turn off kitchen, bath, and other exhaust fans within 20 minutes after you are done cooking or bathing; when replacing exhaust fans, consider installing high-efficiency, low-noise models.

During the heating season, keep the draperies and shades on your south-facing windows open during the day to allow the sunlight to enter your home and closed at night to reduce the chill you may feel from cold windows.

During the cooling season, keep the window coverings closed during the day to prevent solar gain.

SOLAR SERDAR - TIPS for RENEWABLE
Did you know that the typical U.S. family spends about $1,900 a year on home utility bills? Unfortunately, a large portion of that energy is wasted. And each year, electricity generated by fossil fuels for a single home puts more carbon dioxide into the air than two average cars. And as for the road, transportation accounts for 67% of all U.S. oil consumption. The good news is that there is a lot you can do to save energy and money at home and in your car. Start making small changes today (see sidebar). To cut your energy use up to 25%, see the Long-Term Savings Tips throughout this booklet.

The key to achieving these savings in your home is a whole-house energy efficiency plan. To take a whole-house approach, view your home as an energy system with interdependent parts. For example, your heating system is not just a furnace—it's a heat-delivery system that starts at the furnace and delivers heat throughout your home using a network of ducts. Even a top-of-the-line, energy-efficient furnace will waste a lot of fuel if the ducts, walls, attic, windows, and doors are not properly sealed and insulated. Taking a whole-house approach to saving energy ensures that dollars you invest to save energy are spent wisely.

Energy-efficient improvements not only make your home more comfortable, they can yield long-term financial rewards. Reduced utility bills more than make up for the higher price of energy-efficient appliances and improvements over their lifetimes. In addition, your home could bring in a higher price when you sell.
After you have identified where your home is losing energy, assign priorities by asking yourself a few important questions:

How much money do you spend on energy?

Where are your greatest energy losses?

How long will it take for an investment in energy efficiency to pay for itself in energy cost savings?

Do the energy-saving measures provide additional benefits that are important to you (for example, increased comfort from installing double-paned, efficient windows)?

How long do you plan to own your current home?

Can you do the job yourself or will you need to hire a contractor?

What is your budget and how much time do you have to spend on maintenance and repair?

Once you assign priorities to your energy needs, you can form a whole house efficiency plan. Your plan will provide you with a strategy for making smart purchases and home improvements that maximize energy efficiency and save the most money.More info at solarserdar@gmail.com

Another option is to get the advice of a professional. Many utilities conduct energy audits for free or for a small charge. For a fee, a professional contractor will analyze how well your home's energy systems work together and compare the analysis to your utility bills. He or she will use a variety of equipment such as blower doors, infrared cameras, and surface thermometers to find leaks and drafts. After gathering information about your home, the contractor or auditor will give you a list of recommendations for cost-effective energy improvements and enhanced comfort and safety. A reputable contractor can also calculate the return on your investment in high-efficiency equipment compared with standard equipment.
Checking your home's insulation is one of the fastest and most cost-effective ways to use a whole-house approach to reduce energy waste and make the most of your energy dollars. A good insulating system includes a combination of products and construction techniques that protect a home from outside hot or cold temperatures, protect it against air leaks, and control moisture.
Rolls and batts—or blankets—are flexible products made from mineral fibers, such as fiberglass and rock wool.

They are available in widths suited to standard spacings of wall studs and attic or floor joists: 2x4 walls can hold R-13 or R-15 batts; 2x6 walls can have R-19 or R-21 products.

Loose-fill insulation—usually made of fiberglass, rock wool, or cellulose in the form of loose fibers or fiber pellets, it should be blown into spaces using special pneumatic equipment. The blown-in material conforms readily to building cavities and attics. Therefore, loose-fill insulation is well suited for places where it is difficult to install other types of insulation.

Rigid foam insulation—foam insulation typically is more expensive than fiber insulation. But it's very effective in buildings with space limitations and where higher R-values are needed. Foam insulation R-values range from R-4 to R-6.5 per inch of thickness, which is up to 2 times greater than most other insulating materials of the same thickness.

Foam-in-place insulation—this type can be blown into walls and reduces air leakage, if blown into cracks, such as around window and door frames.

Insulation Tips
Consider factors such as your climate, building design, and budget when selecting insulation R-values for your home.

Use higher density insulation on exterior walls, such as rigid foam boards, in cathedral ceilings and on exterior walls.

Ventilation helps with moisture control and reducing summer cooling bills. Attic vents can be installed along the entire ceiling cavity to help ensure proper airflow from the soffit to the attic to make a home more comfortable and energy efficient. Do not ventilate your attic if you have insulation on the underside of the roof. Check with a qualified contractor.

Recessed light fixtures can be a major source of heat loss, but you need to be careful how close you place insulation next to a fixture unless it is marked IC—designed for direct insulation contact. Check your local building codes for recommendations. See Lighting for more about recessed cans.

As specified on the product packaging, follow the product instructions on installation and wear the proper protective gear when installing insulation.

Long-Term Savings Tip
One of the most cost-effective ways to make your home more comfortable year-round is to add insulation to your attic.

Adding insulation to the attic is relatively easy and very cost effective. To find out if you have enough attic insulation, measure the thickness of the insulation. If it is less than R-30 (11 inches of fiber glass or rock wool or 8 inches of cellulose), you could probably benefit by adding more. Most U.S. homes should have between R-30 and R-60 insulation in the attic. Don't forget the attic trap or access door.

If your attic has enough insulation and your home still feels drafty and cold in the winter or too warm in the summer, chances are you need to add insulation to the exterior walls as well. This is a more expensive measure that usually requires a contractor, but it may be worth the cost if you live in a very hot or cold climate. If you replace the exterior siding on your home, you should consider adding insulation at the same time.

You may also need to add insulation to your crawl space or basement. Check with a professional contractor.

New Construction
For new homes in most climates, you will save money and energy if you install a combination of cavity insulation and insulative sheathing. Cavity insulation can be installed at levels up to R-15 in a 2 in. x 4 in. wall and up to R-21 in a 2 in. x 6 in. wall. The insulative sheathing, used in addition to this cavity insulation, helps to reduce the energy that would otherwise be lost through the wood frame. The table below shows the recommended combinations. For example, in Zone 5, you could use either a 2x4 wall with R-13 or a 2x6 wall with R-21. For either of those two walls, you should also use an inch of insulative sheathing that has an R-value of R-5 or R-6.

Today, new products are on the market that provide both insulation and structural support and should be considered for new home construction or additions. Structural insulated panels, known as SIPs, and masonry products like insulating concrete forms are among these. Some homebuilders are even using an old technique borrowed from the pioneers: building walls using straw bales.
First, test your home for air tightness. On a windy day, carefully hold a lit incense stick or a smoke pen next to your windows, doors, electrical boxes, plumbing fixtures, electrical outlets, ceiling fixtures, attic hatches, and other locations where there is a possible air path to the outside. If the smoke stream travels horizontally, you have located an air leak that may need caulking, sealing, or weatherstripping.

Caulk and weatherstrip doors and windows that leak air.

Caulk and seal air leaks where plumbing, ducting, or electrical wiring penetrates through walls, floors, ceilings, and soffits over cabinets.

Install foam gaskets behind outlet and switch plates on walls.

Look for dirty spots in your insulation, which often indicate holes where air leaks into and out of your house. You can seal the holes with low-expansion spray foam made for this purpose.

Look for dirty spots on your ceiling paint and carpet, which may indicate air leaks at interior wall/ceiling joints and wall/floor joists. These joints can be caulked.

Install storm windows over single-pane windows or replace them with more efficient windows, such as double-pane. See Windows on page 18 for more information.

When the fireplace is not in use, keep the flue damper tightly closed. A chimney is designed specifically for smoke to escape, so until you close it, warm air escapes—24 hours a day!

For new construction, reduce exterior wall leaks by installing house wrap, taping the joints of exterior sheathing, and comprehensively caulking and sealing the exterior walls.

Use foam sealant around larger gaps around windows, baseboards, and other places where warm air may be leaking out.

Kitchen exhaust fan covers can keep air from leaking in when the exhaust fan is not in use. The covers typically attach via magnets for ease of replacement.

Replacing existing door bottoms and thresholds with ones that have pliable sealing gaskets is a great way to eliminate conditioned air leaking out from underneath the doors.

Fireplace flues are made from metal, and over time repeated heating and cooling can cause the metal to warp or break, creating a channel for hot or cold air loss. Inflatable chimney balloons are designed to fit beneath your fireplace flue during periods of non-use. They are made from several layers of durable plastic and can be removed easily and reused hundreds of times. Should you forget to remove the balloon before making a fire, the balloon will automatically deflate within seconds of coming into contact with heat.
Heating and cooling your home uses more energy and drains more energy dollars than any other system in your home. Typically, 43% of your utility bill goes for heating and cooling. What's more, heating and cooling systems in the United States together emit 150 million tons of carbon dioxide into the atmosphere each year, adding to global climate change. They also generate about 12% of the nation's sulfur dioxide and 4% of the nitrogen oxides, the chief ingredients in acid rain.

No matter what kind of heating, ventilation, and air-conditioning system you have in your house, you can save money and increase your comfort by properly maintaining and upgrading your equipment. But remember, an energy-efficient furnace alone will not have as great an impact on your energy bills as using the whole-house approach. By combining proper equipment maintenance and upgrades with appropriate insulation, air sealing, and thermostat settings, you can cut your energy use for heating and cooling, and reduce environmental emissions, from 20% to 50%.

Heating and Cooling Tips
Set your thermostat as low as is comfortable in the winter and as high as is comfortable in the summer.

Clean or replace filters on furnaces once a month or as needed.

Clean warm-air registers, baseboard heaters, and radiators as needed; make sure they're not blocked by furniture, carpeting, or drapes.

Bleed trapped air from hot-water radiators once or twice a season; if in doubt about how to perform this task, call a professional.

Place heat-resistant radiator reflectors between exterior walls and the radiators.

Turn off kitchen, bath, and other exhaust fans within 20 minutes after you are done cooking or bathing; when replacing exhaust fans, consider installing high-efficiency, low-noise models.

During the heating season, keep the draperies and shades on your south-facing windows open during the day to allow the sunlight to enter your home and closed at night to reduce the chill you may feel from cold windows.

During the cooling season, keep the window coverings closed during the day to prevent solar gain.

solarserdar@gmail.com
http://solarserdar.wordpress.com

CROATIAN CENTER of RENEWABLE ENERGY SOURCES ( CCRES )

SOLAR SERDAR -SOLARNI PAKETI cjenik

SOLAR SERDAR
Vakuumski cijevni kolektor VTK 570 ; neto: 1m2 auroTHERM exclusiv VTK 570
VPC kn 4.957,84 MPC kn 6 .048,56
Vakuumski cijevni kolektor VTK 1140 ; neto: 2m2 auroTHERM exclusiv VTK 1140
VPC kn 9.915,68 MPC kn 12.097,12
Spojni set za instaliranje modula (izolacija i pokrov za spoj kolektora)
VPC kn 388,85 MPC kn 4 74,40
Produžni modul za spajanje šina
VPC kn 291,64 MPC kn 3 55,80
Priključni set - hidraulički adapter s izolacijom (15x3/4 2kom., prehod iz DN 15 na 3/4)
VPC kn 194,43 MPC kn 2 37,20
Set za instalaciju na kosi krov 2 kolektora VTK 570 ili 1 VTK 1140
VPC kn 1.244,32 MPC kn 1 .518,07
Set za instalaciju na kosi krov 3 kolektora VTK 570 ili 1 VTK 1140 i 1 VTK 570
VPC kn 1.691,50 MPC kn 2 .063,63
Set za instalaciju na ravni krov 2 kolektora VTK 570 ili 1 VTK 1140
VPC kn 797,14 MPC kn 9 72,51
Set za instalaciju na ravni krov 1 kolektora VTK 570
VPC kn 486,06 MPC kn 5 93,00
Set konzola za instalaciju kolektora na crijep od škriljevca-4 kom.
VPC kn 544,39 MPC kn 6 64,16
Set dugih vijaka za instalaciju na klasičan crijep ili Berliner-4 kom.
VPC kn 651,32 MPC kn 7 94,61
Okvir za montažu VTK kolektora na ravni krov
VPC kn 1.312,37 MPC kn 1 .601,09
Ploča za učvršćenje okvira za montažu VTK kolektora na ravni krov (309630)
VPC kn 923,52 MPC kn 1 .126,69

SOLARNI PAKETI

Solarni paket 1 PRO - instaliranje na kosi krov
sp1pro* sp1pro (2 kom.VFK 145V.; VIH S 300; cijevna grupa; tekućina 20 lit.; exp.posuda 18 lit, prihvatna kompenzacijska posuda 5lit.;pribori za instaliranje na kosi krov) kn 18.285,67 kn 2 2.308,52
Solarni paket 1 PLUS - instaliranje na kosi krov
sp1plus* sp1plus (3 kom.VFK 145V.; VIH S 300; cijevna grupa; tekućina 20 lit.; exp.posuda 18 lit, prihvatna kompenzacijska posuda 5lit.;pribori za instaliranje na kosi krov) kn 22.533,86 kn 2 7.491,31
Solarni paket 2 PRO - instaliranje na kosi krov
sp2pro* sp2pro (3 kom.VFK 145V.; VIH S 400; cijevna grupa; tekućina 20 lit.; exp.posuda 25 lit, prihvatna kompenzacijska posuda 5lit.;pribori za instaliranje na kosi krov) kn 25.071,10 kn 3 0.586,75
Solarni paket 2 PLUS - instaliranje na kosi krov
sp2plus* sp2plus (4 kom.VFK 145V.; VIH S 400; cijevna gr.; tekućina 20 lit.; exp.posuda 35lit, prihvatna kompenzacijska posuda 5lit.;pribori za instaliranje na kosi krov) kn 29.329,01 kn 3 5.781,39
Solarni paket 3 PRO - instaliranje na kosi krov
sp3pro* sp3pro (4 kom.VFK 145V.; VIH S 500; cijevna grupa; tekućina 20 lit.; exp.posuda 35 lit, prihvatna kompenzacijska posuda 5lit.;pribori za instaliranje na kosi krov) kn 30.991,35 kn 3 7.809,44
Solarni paket 3 PLUS - instaliranje na kosi krov
sp3plus* sp3plus (5 kom.VFK 145V.; VIH S 500; cijevna gr.; tekućina 20+20 lit.; exp.posuda 50lit, prihvatna kompenzacijska posuda 5lit.;pribori za instaliranje na kosi krov) kn 36.308,87 kn 4 4.296,82
Solarni paket 4 PLUS - instaliranje na kosi krov
sp4plus* sp4plus (5 kom.VFK 145V.; VPS SC 700; cijevna gr.; tekućina 20+20 lit.; exp.posuda 50lit, prihvatna kompenzacijska posuda 12lit., VRS 620/2, 3xVR10, kn 42.774,17 kn 5 2.184,49
pribori za instaliranje na kosi krov)
Solarni paket 5 PLUS - instaliranje na kosi krov
sp5plus* sp5plus (8 kom.VFK 145V.; VPS S 100; TVS 40, cijevna grupa.; tekućina 20+20 lit.; exp.posuda 80lit, prihvatna kompenzacijska posuda 12lit., VRS 620/2, kn 69.614,55 kn 8 4.929,75
pribori za instaliranje na kosi krov)
Solarni paket 6 PRO - instaliranje na kosi krov
sp6pro* sp6pro (1 kom.VTK 570, 1 kom VTK 1140.; VIH S 300; cijevna grupa; tekućina 20 lit.; expanzijska posuda 25 lit; brzo odzračni lončić; prihvatna kompenzacijska kn 24.147,59 kn 2 9.460,05
posuda 5lit, pribori za instaliranje na kosi krov)
Solarni paket 6 PLUS - instaliranje na kosi krov
sp6plus* sp6plus (2 kom VTK 1140.; VIH S 300; cijevna grupa; tekućina 20 lit.; expanzijska posuda 25 lit; brzo odzračni lončić; prihvatna kompenzacijska kn 29.299,85 kn 3 5.745,81
posuda 5lit, pribori za instaliranje na kosi krov)
Solarni paket 7 PRO - instaliranje na kosi krov
sp7pro* sp7pro (2 kom VTK 1140.; VIH S 400; cijevna grupa; tekućina 20 lit.; expanzijska posuda 25 lit; brzo odzračni lončić; prihvatna kompenzacijska kn 31.701,00 kn 3 8.675,22
posuda 5lit, pribori za instaliranje na kosi krov)
Solarni paket 7 PLUS - instaliranje na kosi krov
sp7plus* sp7plus (2 kom VTK 1140, 1 kom VTK 570.; VIH S 400; cijevna grupa; tekućina 20 lit.; expanzijska posuda 25 lit; brzo odzračni lončić; prihvatna kompenzacijska kn 36.532,46 kn 4 4.569,60
posuda 5lit, pribori za instaliranje na kosi krov)
Solarni paket 8 PRO - instaliranje na kosi krov
sp8pro* sp8pro (3 kom VTK 1140.; VIH S 500; cijevna grupa; tekućina 20+10 lit.; expanzijska posuda 35 lit; brzo odzračni lončić; prihvatna kompenzacijska kn 43.599,81 kn 5 3.191,76
posuda 5lit, pribori za instaliranje na kosi krov)
Solarni paket 8 PLUS - instaliranje na kosi krov
sp8plus* sp8plus (3 kom VTK 1140, 1 kom VTK 570.; VIH S 500; cijevna grupa; tekućina 20+10 lit.; expanzijska posuda 35 lit; brzo odzračni lončić; prihvatna kompenzacijska kn 48.431,27 kn 5 9.086,15
posuda 5lit, pribori za instaliranje na kosi krov)
*potrebno odabrati dodatni pribor: u ovisnosti o vrsti pokrova krova (krovni nosači za crijep tipa Tondach/Bramac, Biber, za ostale tipove),
regulaciju (VRS 560/2 ili VRS 620/2), termostatske ventile, električne grijače (2 ili 6kW), sigurnosnu grupu, automatski odzračni sustav,
hidraulički blok (309640)...
*paketi nisu zamjena za projektiran sustav, paketi su rađeni po pretpostavci da je kolektorsko polje usmjereno na južnu stranu s nagibom 30-45°,
paketi 1-5 su za okomitu izvedbu kolektorskog polja, srednja godišnja suma ozračenosti vodoravne plohe u RH iznosi 1,15-1,6 MWh/m2,
specifikaciju opreme za vodoravnu izvedbu kolektorskih polja i za ugradnju u krov i na ravni krov šaljemo na upit

SOLAR SERDAR
solarserdar@gmail.com
http://solarserdar.wordpress.com

SOLAR SERDAR recommends URSA insulation

SOLAR SERDAR preporuča URSA

Vodeći igrač na međunarodnoj sceni
S dvanaest tvornica i više od 2200 zaposlenih »URSA« je ostvarila više od 435 milijuna EUR prihoda u 2004. godini. Tvornice izolacijskih materijala »URSA« nalaze se u Španjolskoj, Francuskoj, Belgiji, Njemačkoj, Poljskoj, Rusiji, Mađarskoj i Sloveniji.

Tvrtka »URSA Slovenija« d.o.o. u vlasništvu je jedne od vodećih europskih kompanija na području izolacija »URSA International GmbH«, te predstavlja suvremenu uspješnu tvrtku, koja je poslovno i vlasnički još od 1992. godine integrirana u europsku privredu.

Naša razvojna strategija, kvalitet naših proizvoda i poštivanje ekoloških standarda te interesa naših kupaca, izgradili su robnoj marki »URSA« ugledan položaj na brojnim europskim tržištima.

Kao proizvođač toplinskih i zvučnih izolacija od mineralne - staklene vune i ekstrudiranog polistirena unutar grupe »URSA International« imamo razvijenu prodajnu i tehničko – servisnu mrežu putem vlastitih tvrtki i predstavništava u cijeloj jugozapadnoj i jugoistočnoj Europi, a naše proizvode prodajemo u 29 država. Većinu prihoda ostvarujemo na inozemnim tržištima što nas ubraja među najveće izvoznike u Republici Sloveniji.

Vrhunski kvalitet i izolacijska svojstva te dugotrajnost sistema toplinske i zvučne izolacije lako se postižu poštivanjem potpune usklađenosti svih komponenti koje čine pojedini konstrukcioni sistem toplinskih i zvučnih izolacija na objektu. Pri tome je potrebno pojedine dijelove sistema optimalizirati imajući u vidu sve uvjete ugradnje i načina upotrebe. U tom su cilju naši stručnjaci, koji u svom radu koriste dugogodišnja iskustva u proizvodnji i ugradnji materijala, pored proizvoda od mineralne - staklene vune za građevinarstvo i industriju »URSA GLASSWOOL«, ponudili tržištu i vlastitu proizvodnju izolacijskih materijala od ekstrudiranoga polistirena »URSA XPS«.Više informacija na solarserdar@gmail.com

Najučestalija pitanja

Općenito o staklenoj vuni
U čemu je razlika između mineralne, staklene i kamene vune?
Pod mineralnom vunom se podrazumijevaju i staklena i kamena vuna. Razlika između njih je u sirovini od koje se dobijaju, tehnološkom postupku i krajnjim osobinama materijala.

SIROVINA
Glavna sirovina od koje se dobija staklena vuna je kvarcni pijesak s dodatkom recikliranog stakla. Kamena vuna se dobija od kamenja odnosno minerala eruptivnog porijekla - bazalta i diabaza s dodatkom koksa.

TEHNOLOŠKI POSTUPAK
Razlika je u načinu izrade vlakana: vlakna staklene vune izrađuju se ulijevanjem taline kvarcnog pijeska i stakla u rotore, dok se kamena vuna pak dobija nalijevanjem otopljene kamene smjese na rotacione valjke.

OSOBINE
Vlakna od staklene vune su elastičnija i približno 10-puta duža. Povratna elastičnost vlakana omogućava komprimiranje na 5-puta manji volumen, što podrazumijeva manji volumen pri transportu i skladištenju. Ugradnja je jednostavnija jer nije potrebno precizno rezanje materijala na ugradnu mjeru. Po ugradnji u praksi ne ostaju prazna – nepopunjena mjesta, koja predstavljaju toplinske mostove.


Da li staklena vuna ima štetan utjecaj na zdravlje ljudi?
Staklena vuna nema štetan utjecaj na zdravlje ljudi!

“URSA” izolacije od staklenih vlakana nose znak kvalitete RAL. To znači, da proizvodi označeni tim znakom zadovoljavaju europske kriterije, koji su propisani od strane »RAL Deutsches Institut für Gütesicherung und Kennzeichehnung e.V.«, a prema kojima takvi proizvodi nisu štetni za zdravlje ljudi. Svi proizvodi s oznakom RAL garantiraju sigurnost kako montažerima tako i korisnicima objekta.

Vlakna toplinske izolacije “URSA” GLASSWOOL biološki su razgradljiva i ne djeluju agresivno na sluznicu dišnih organa. Zdravstvenu neškodljivost redovito, dva puta godišnje, kontrolira nezavisna, stručno priznata institucija. Prilikom ugradnje se preporuča upotreba zaštitnih rukavica i radnog odijela.


Da li je staklena vuna “URSA” primjerena za protupožarnu zaštitu?
Da! Staklena vuna je negoriv materijal klase A1 po europskoj klasifikaciji i primjeren je za upotrebu u konstrukcijama od kojih se zahtijeva određeni stupanj protupožarnosti i u konstrukcijama kod kojih se od određenih materijala zahtijeva određena klasa gorivosti.

Staklena vuna ima temperaturu taljenja iznad 550°C, negoriva je i moguće ju je upotrebljavati u konstrukcijama od kojih se zahtijeva određeni stupanj protupožarnosti. Upotrebom staklene vune moguće je postići protupožarnost pregradnih zidova, u zavisnosti od izbora obloge od gips-kartonskih ploča, i do 120 min. Detaljniji podaci o klasi protupožarnosti određuju se na osnovi testiranja kompletnih sistema. Vrijednosti za klasu protupožarnosti date su u certifikatu i tehničkoj dokumentaciji ponuđača sistema.


Da li staklena vuna upija vodu?
Hidrofobni dodaci spriječavaju navlaživanje vune između vlakana. Po europskom standardu (SIST EN 13162) proizvodi se mogu testirati po dva kriterija: na kratkotrajno upijanje vlage i dugotrajno upijanje vlage. Proizvodi koji su po spomenutim normama označeni sa W p i W lp ispunjavaju propisane vrijednosti. To znači da je navlaživanje ipak prisutno, ali u količinama - granicama propisanim standardom.


Da li je navlažena izolacija od mineralne staklene vune još uvijek upotrebljiva?
Navlažena tolplinska izolacija “URSA” GLASSWOOL nakon sušenja ima praktično iste toplinsko -izolacijske karakteristike kao i prije navlaživanja.

U primjeru jednokratnog navlaživanja vune potrebno je omogućiti odgovarajuće isušivanje. Preporučljivo je da se vuna ostavi otvorena barem s jedne strane tako da je proces isušivanja kraći. Isušena vuna praktično ima identične toplinsko -izolacijske karakteristike kao i prije navlaživanja. Razumljivo, navlaživanje se ne smije pojavljivati često jer bi se u tom slučaju izolacija slegla, što bi utjecalo na slabiju izolativnost.


Kuda s otpacima od mineralne staklene vune “URSA” GLASSWOOL, koji ostaju poslije montaže ili po isteku vijeka trajanja?
Deponiranje otpadaka moguće je izvršiti na građevinske deponije ili na klasične deponije za domaćinstva, jer ovi otpaci ne sadrže opasne materije.

U čemu su prednosti izolacije u rolama?
Termo i zvučna izolacija “URSA” u pločama ili u roli ima odgovarajuće tehničke karakteristike u fazi ugradnje. Prednost izolacije u roli je u do 5 puta manjem volumenu kojeg izolacija zauzima u fazi skladištenja, transporta i ostalih manipulacija. Staklena vuna je materijal koji omogućava komprimiranje i pakiranje u role jer su vlakna elastična. Nakon razvijanja role izolacija se vraća na prvobitnu - nazivnu debljinu i u fazi upotrebe se ne sliježe.

Prednost izolacije u roli je što se poprečnim rezanjem optimalno upotrebljava cijela količina. Kod izolacije u pločama to je neizvodljivo zbog standardnog formata ploče.




Upotreba izolacije od mineralne staklene vune “URSA” GLASSWOOL
Za koje su namjene primjereni pojedini toplinsko- i zvučno- izolacijski materijali “URSA”?
Toplinsko- i zvučno- izolacijski materijali “URSA” se dijele na dvije grupe:

mineralna staklena vuna “URSA” Glasswool
Ekstrudirani polistiren “URSA” XPS
Unutar obje grupe postoji veći broj proizvoda, koji se razlikuju po primjerenosti za pojedine namjene u građevinarstvu. Osnovna podjela materijala po namjenama je prikazana u tablicama. Za pojedine namjene moguća je i upotreba drugih materijala koji nisu navedeni u tablicama, a za što je preporučljivo za savjet kontaktirati “URSA” tehničku službu.
Koje su preporučene debljine toplinske izolacije na pojedinim konstrukcija ma?
Izbor optimalne debljine toplinske izolacije zavisi od lokacije građevine i očekivanog temperaturnog režima u građevini. Većom debljinom toplinske izolacije utječemo na manju potrošnju energije za grijanje u zimskom razdoblju, kao i na klimatizaciju za vrijeme ljetnih vrućina. Iskustvene debljine za pojedine konstrukcije su:

laki kosi krov 20 – 25 cm
kosi krov s armirano betonskom konstrukcijom 16 – 20 cm
vanjski zidovi 8 – 10 cm
tla na terenu 8 – 10 cm
zid u zemlji 8 – 10 cm




Mineralna staklena vuna “URSA” za kosi krov
Koje osobine kosog krova postižemo pravilnim izoliranjem?
Posebne kvalitete kosog krova su:

toplinska izolativnost i toplinska stabilnost: s ciljem smanjenja potrebne energije za grijanje prostora u zimskom razdoblju te spriječavanje pregrijavanja i smanjenje potrebne energije za hlađenje prostora za vrijeme ljetnih vrućina,
nepropusnost za zrak: u cilju spriječavanja nekontroliranih toplinskih gubitaka infiltracijom hladnog zraka,
zvučna izolativnost: u cilju spriječavanja prodora zvuka iz vani kao i prodor zvuka u slučaju oborina,
sposobnost »disanja«: postiže se pravilnim izborom materijala što ujedno spriječava nastajanje kondenzacije unutar krovne konstrukcije.


Zašto je mineralna staklena vuna “URSA” najprimjereniji materijal za izolaciju kosih krovova?
Izolacija od mineralne staklene vune ima brojne prednosti prilikom izoliranja kosog krova. Glavni razlog za to je ELASTIČNOST materijala. Staklena vlakna u izolaciji su veoma duga, čvrsta i elastična. To omogućava slijedeće:

izolacija od mineralne staklene vune može se komprimirati u role, tako da u fazi skladištenja i transporta zauzima do 5-puta manje prostora nego što ga zauzima po razvijanju role. Nakon odstranjivanja ambalažne folije izolacija u roli se po razvijanju role podigne na nominalnu - ugradnu debljinu.
prije ugradnje između rogova izolacija se reže na 1 do 2 cm veću širinu. Elastičnost omogućava da se vuna prilagodi prostoru u koji se postavlja. U slučaju drvenog potkrovlja to je vrlo značajno budući da je drvo prirodan materijal koji uvijek »radi«. Rogovi se u praksi uvijek malo izvijaju prilikom čega staklena vuna ispunjava cijeli prostor; toplinski mostovi se ne pojavljuju na mjestima uz rogove kao prilikom upotrebe krutih ili tvrdih, neelastičnih, izolacijskih materijala.
poprečnim rezanjem vune iz role, u pravilu, upotrijebi se cijela količina vune koja je u roli - praktično nema otpada.


Koje su najčešće greške kod izvođenja kosih krovova?
Ispod krovnog pokrova postavljena je podaščana oplata na koju je postavljena krovna ljepenka a s izolacijom je ispunjen cijeli prostor do podaščane oplate i ljepenke bez ventilacijskog kanala. U tom slučaju će se za vrijeme hladnih dana ispod ljepenke skupljati kondenz. To s vremenom utječe na truljenje drveta, smanjuje toplinsku izolativnost, a može doći i do prodora kondenza unutar prostora potkrovlja.
Sanacija se izvodi bez dodatne toplinske izolacije s donje strane rogova. U tom slučaju realna toplinska izolativnost krovne konstrukcije nije jednaka izolativnosti na mjestu izolacije. Neizolirani rogovi predstavljaju toplinski most sa približno 4 puta slabijom izolativnošću.
Parna zapreka ili parna brana namještena je korektno ali prilikom postavljanja elektro instalacija na više mjesta je probijena. U navedenem slučaju postoji opasnost da na mjestima proboja dođe do prevelikog prolaska vlažnog zraka prema vanjskim slojevima. Uslijed toga ispod paropropusne folije ili ispod krovnog pokrova može doći do kondenzacije. Sve eventualne proboje potrebno je odgovarajuće zaptiti odnosno zalijepiti.

Kako kvalitetno izvesti kosi krov iznad potkrovlja u kojem se stanuje u slučaju novogradnje?
Preporuča se ukupna debljina toplinske izolacije od 20 do 25 cm. To podrazumijeva u cijelosti ispunjen prostor između rogova uz dodatnih 5 do 12 cm izolacije ispod njih. Posebno je značajna pravilna upotreba građevinskih folija. Na unutarnjoj - toploj strani krova potrebno je ugraditi foliju – parnu prepreku ili parnu branu. Preporuča se ugradnja parne prepreke, jer ona u određenoj mjeri propušta difuznu vodenu paru, ali samo u količinama koje ne utječu na pojavu prekomjerne kondenzirane vlage unutar krovne konstrukcije. Parne prepreke imaju paropropusnost približno sd = 2,0 metra. Posebno je značajna preciznost prilikom ugradnje parnih zapreka. Svi uzdužni spojevi, proboji i priključci na zidove moraju biti dobro zaptiveni odnosno zalijepljeni. Za tu namjenu postoje različite zaptivno -ljepljive trake i mase.

Krov treba biti izveden s ventilacijskim kanalom minimalne visine 4 cm i odgovarajućom izvedbom prijema zraka u ventilirani prostor i ispusta u sljemenu. Zračni kanal spriječava kondenzaciju vlage ispod krovnog pokrivača a ujedno spriječava i pregrijavanje podkrovlja za vrijeme ljetnih vrućina.

Između izolacije i zračnog kanala mora biti namješten sekundarni krovni pokrivač - paropropusna-vodonepropusna folija. Dobre paropropusne folije imaju sd vrijednost £ 0,02 m.

Ugradnja podaščane oplate nije nužna, ali je korisna jer krovu daje prohodnost za vrijeme montaže i kasnijih intervencija. Daske moraju biti suhe i namještene uz međusobni razmak od 1 do 2 cm.


Kako pravilno izvesti sanaciju postojećeg kosog krova s vanjske strane?
Sanacija krovne konstrukcije s vanjske strane obično se izvodi prilikom zamjene krovnog pokrova. Potrebno je ocjeniti u kakvom je stanju postojeća toplinska izolacija i parna zapreka. Ako je potrebno postavljanje nove parne prepreke nju se treba polagati neposredno uz rogove. Preklope parne prepreke je potrebno međusobno zalijepiti . Posebno je bitno izvesti dobar spoj - postići dobru zaptivenost - između parne prepreke i zida. Po vjetrovitom vremenu u pravilu dolazi do prodora hladnog zraka zbog nestručnog izvođenja tog detalja.

Ako postojeća toplinska izolacija nije mokra i ravnomjerno ispunjava prostor između rogova, ne treba intervenirati . Često je potrebno dodati odgovarajuću debljinu tako da prostor između rogova po visini bude potpuno ispunjen. Da bi postigli odgovarajuću debljinu toplinske izolacije, na rogove se s gornje strane poprečno postave letve. Između letvi se postavi dodatni sloj toplinske izolacije “URSA”. Visina letve definira debljinu toplinske izolacije a preporuča se da bude od 5 do 10 cm. Ukupna debljina izolacije neka bude 20 do 25 cm.

Preko letvi se namjesti paropropusna folija koja ujedno ima i ulogu sekundarnog krovnog pokrivača.

Potom se postavljaju kontraletve visine minimalno 4 cm koje formiraju kanal za provjetravanje . Na njih se poprečno postave letve koje služe za polaganje krovnog pokrivača.


Je li toplinska izolacija od mineralne staklene vune “URSA” samonosiva kod montaže između rogova s donje strane?
“URSA” ima u svom programu vi še razina kvaliteta. Prilikom upotrebe odgovarajućeg materijala (“URSA” SF 35 ili “URSA” SF 38) to nije problem.

Otežano namještanje toplinske izolacije između rogova sdonje strane događa se u slučaju materijala “URSA” ELF ili DF 40 kod tanjih debljina.

Prilikom upotrebe odgovarajućeg materijala i rezanja na dimenziju koja je 1 do 2 cm veća od potrebne mjere, izolacija stabilno stoji na svom mjestu za vrijeme montaže i poslije tijekom eksploatacije.


U čemu je razlika među građevinskim folijama u sistemu kosih krovova - parna brana, parna zapreka, paropropusna folija?
Parna brana sasvim spriječava prolaz vodene pare. Po pravilu se ugrađuje što bliže toplijoj strani konstrukcije (npr. između unutrašnje finalne obloge i izolacije).

Parna zapreka djelomično spriječava prolaz vodene pare. U pravilu se ugrađuje što bliže toplijoj strani konstrukcije. Za razliku od parne brane još uvijek omogućava "disanje" krova. Parna zapreka se ugrađuje u slučaju kad na vanjskoj strani imamo izveden prozračni kanal, koji omogućava odzračivanje vodene pare koja prolazi kroz krovnu konstrukciju.

Paropropusne folije (sekundarni krovni pokrivači) ne smiju spriječavati prolaz vodene pare. Ugrađuju se na hladnijoj strani izolacije jer bi ugradnja parne brane, ili parne prepreke, u suprotnom slučaju predstavljala problem. Vodena para mora preko nje nesmetano prolaziti prema vani (u ventilacioni kanal), tako da ne dolazi do kondenzacije unutar krovne konstrukcije. Paropropusna folija služi kao sigurnosni-sekundarni pokrivač te kao zaštita izolacije i cijele konstrukcije od vjetra.

Najvažnije tehničke karakteristike folija su: stupanj propuštanja vodene pare - paropropusnost, mehaničke karakteristike (prije svega prekidna čvrstoća i otpornost na proparavanja čavlom) te otpornost na starenje (otpornost na izlaganje UV zracima).

Paropropusnost se označava s sd.
Pojedine folije imaju slijedeće vrijednosti:

parne brane sd ≥ 100 m,
parne prepreke sd ≥ 2 m
dobre paropropusne folije sd ≤ 0,02 m.


U čemu je razlika između materijala “URSA” SF 38 i “URSA” DF 40?
Obje izolacije imaju istu namjenu – izolacija kosih krovova - ali je “URSA” SF 38 kvalitetnija.

Razlika je u kompaktnosti i samonosivosti. “URSA” SF 38 je kompaktnija i ima veću samonosivost uglavnom zbog veće količine veziva. Pored toga razlika je i u vizualnom izgledu: “URSA” SF 38 ima utisnute oznake na površini, koje omogućavaju jednostavnije odmjeravanje i rezanje te ugradnju.




Mineralna staklena vuna “URSA” za suhomontažne pregradne zidove
Zašto je mineralna staklena vuna “URSA” najprimjereniji materijal za izolaciju suhomontažnih pre gradnih zidova?
Razlozi za to su:

postizanje visoke zvučne izolativnosti zida,
postizanje traženih protupožarnih svojstava zidova,
kompaktnost i otpornost prema slijeganju zbog dugih i isprepletenih vlakana,
jednostavna ugradnja, lagan i komprimiran materijal,
modulne dimenzije, minimalan otpad materijala - maksimalno iskorištenje,
stabilan visoki kvalitet,
odlična logistička potpora,
tehnička potpora projektantima i izvođačima


Postiže li se suhomontažnim pregradnim zidovima kvalitetna zvučna zaštita?
Lagani, suhomontažni pregradni zidovi postižu visok stupanj zvučne izolacije. Djeluju principom »masa–opruga-masa«. Princip se lako može objasniti na primjeru lakog montažnog zida koji ima nosivu metalnu konstrukciju, obloge od gips-kartonskih ploča s obje strane i zvučnu izolaciju od mineralne staklene vune “URSA” u međuprostoru. Zvuk svojim gibanjem prouzroči vibraciju gips-kartonske ploče. Ona zbog svoje mase nadalje prouzroči vibriranje koje se djelomično prenosi na zvučnu izolaciju. Zvučna izolacija po principu opruge priguši oscilacije tako da se minimalan dio prenese na drugu oblogu i dalje u susjedni prostor. Na taj način se postiže jednaka ili bolja zvučna izolacija kao kod primjene i do 10-puta težih, masivnih (monolitnih) pregradnih zidova.Više informacija na solarserdar@gmail.com


Koje su najčešće greške prilikom izvođenja suhomontažnih pregradnih zidova?
Kvalitetno izvođenje ima velik utjecaj na karakteristike koje pregradni zid mora zadovoljavati. Najčešće greške prilikom toga su:

Nedovoljna ispunjenost zida toplinskom izolacijom.
Postavljanje pregradnog zida direktno na plivajući estrih uslijed čega se zvuk prenosi preko estriha na drugu stranu. Potrebno je postaviti zid na noseću ploču, sdilatacijom između plivajućeg estriha i pregradnog zida.
Ugradnja elektroinstalacija s nepreciznim izrezima obloga, neispunjenost preostalog prostora s izolacijom, pozicioniranje elemenata na obje strane zida na istom mjestu čime se stvara zvučni most.
Izvođenje pregradnih zidova samo do spuštenog stropa i neispunjenje do međukatne konstrukcije čime se također stvara zvučni most.




Mineralna staklena vuna “URSA” za toplinsku i zvučnu izolaciju podnih konstrukcija
Na koji način možemo ograničiti ometajuću buku iz gornjih prostorija zgrade s više stanova?
Jedan od mogućih načina je dodatna suhomontažna obloga postojeće konstrukcije. Ovaj način je namijenjen za veće površine a ne kod manjih površina gdje je efekt prenosa zvuka po obodnim konstrukcijama preveliki. U slučaju problema prevelike buke s gornje etaže sanacija može biti stvarno uspješna samo ako se izvede dodatna obloga kako stropa tako i obodnog zida. Na taj se način smanjuje obodni efekt.

Izmjerena vrijednost zvučne izolacije kod ožbukanog pregradnog zida izrađenog od cigle, debljine 12 cm, sdodatnom oblogom od dvostruke gips kartonske ploče deb. 12,5 mm na metalnoj podkonstrukciji od 50 mm i ispunjenom zvučnom izolacijom “URSA” TWF 1 iznosi 61 dB, što je znatno bolje u odnosu na primjere zidova bez poboljšane zvučne izolativnosti

Sanacije na sličan način su izvodljive, ali nisu jeftine. Veoma je važan i kvalitet izvođenja. Ponekad je radi specifičnog prenosa zvuka po obodnim konstrukcijama teško postići 100% željeni rezultat ali u svakom slučaju se postiže poboljšanje!




Izolacija od ekstrudiranog polistirena “URSA” XPS
Nudi li “URSA” odgovarajuće rješenje za izvođenje ravnog krova?
U proizvodnom programu »URSA« -e, pored staklene vune, postoje i toplinsko - izolacijski materijali od ekstrudiranog polistirena, koji je odličan materijal za izvedbu obrnutog ravnog krova. Obrnuti ravni krov ima brojne prednosti u odnosu na klasičan ravni krov a koje anuliraju minimalnu razliku u cijeni.

Klasični ravni krovovi imaju završni sloj od bitumenske, PVC ili neke druge prikladne hidroizolacije – membrane. Ona je trajno izložena sunčevom zračenju (UV zračenje) a također je izravno izložena i stalnim temperaturnim oscilacijama, što sve zajedno štetno djeluje na hidroizolacijske materijale – uništava ih. Zbog toga obrnuti ravni krov ima slijedeće prednosti:

Hidroizolacijski sloj je toplinskom izolacijom “URSA” XPS zaštićen od sunčevog zračenja.
Hidroizolacijski sloj nije direktno izložen hodanju po njemu pa je smanjena opasnost od probijanja i cijepanja istog.
Toplinska izolacija od ekstrudiranog polistirena ne upija vlagu. Kiša za vrijeme montaže ne utječe na toplinsko - izolacijske osobine što nije slučaj u primjeru klasičnog ravnog krova gdje se upotrebljava kamena vuna.
Obrnuti ravni krov nije problematičan u smislu navlaživanja konstrukcije uslijed difuzije vodene pare.
Klasični ravni krovovi su na lošem glasu upravo zbog gore navedenih razloga odnosno nedostataka. Kod klasičnog ravnog krova praktički je nemoguće locirati mjesto pucanja hidroizolacije. Obrnuti ravni krov rješava sve navedene probleme, vijek trajanja je neproporcionalno veći u odnosu na razliku u cijeni izvođenja kod obje konstrukcije.


Smijemo li kod sistema obrnutog ravnog krova upotrijebiti XPS položen u dva sloja?
Upotreba ekstrudiranog polistirena u dva sloja u sistemu obrnutog ravnog krova nije preporučljiva.

Ako se ekstrudirani polistiren postavlja u dva sloja, postoji opasnost da u slučaju kiše između dva sloja XPS-a uđe voda. To bi izazvalo nastajanje vodenog filma među slojevima. Nastali vodeni film predstavlja vrlo jaku parnu branu (vrlo je paronepropusan!). Voda koja je prodrla, i koja se nalazi u sloju ispod nastalog vodenog filma, s vremenom počinje isparavati zbog više temperature u unutarnjim slojevima te prouzroči povećanje parcijalnog tlaka vodene pare. To može prouzročiti difuzijsko navlaživanje ekstrudiranog polistirena (kondenzaciju). U slučaju “URSA” XPS relativna vlažnost materiala može se podići na razinu do pribl. 3%, što je u usporedbi s konkurentnim materijalima jednako ili čak i bolje. Ali bez obzira na to, iz navedenog razloga slabi toplinska izolativnost i dugoročno postoji opasnost od štete koju bi moglo prouzročiti smrzavanje kondenza u jako hladnim danima.


Smije li se “URSA” XPS lijepiti plamenom na vertikalni zid s bitumenskom hidroizolacijom?
Lijepljenje na takav način je izvodljivo, ali nije preporučljivo.

Prilikom lijepljenja zagrijavanjem bitumenske hidroizolacije otvorenim plamenom može doći do prevelikog stanjivanja hidroizolacije što nije prihvatljivo. Također postoji opasnost od oštećenja izolacijske ploče XPS-a otvorenim plamenom.

Za kvalitetno i sigurno izvođenje preporučljiva je upotreba odgovarajućih lijepila za tu namjenu – lijepila na bitumenskoj osnovi ili cementna građevinska ljepila.
Primjena materijala
»URSA« proizvodi od mineralne staklene vune URSA GLASSWOOL ® i ekstrudiranog polistirena URSA XPS ® su odgovarajući za brojne primjene:

kosi krovovi
pregradni zidovi
provjetravane i neprovjetravane fasade
podne konstrukcije
stropovi - tavanice
ravni obrnuti krovovi
zidovi u zemlji, sokl
klima - kanali
Kontakti
»URSA Zagreb« d.o.o.
Puškarićeva 15,
10250 Lučko
tel.: +385 1 65 26 386
faks: +385 1 65 26 387

Poduzeće URSA ZAGREB d.o.o.,
sjedište: Puškarićeva 15, Lučko, Zagreb, registrirano je kod Trgoviačkog suda u Zagrebu pod brojem 080007579

Prodajna mreža
Zapadna i središnja Hrvatska
Nikola Čulina
mobitel: +385 91 455 59 38
email: nikola.culina@uralita.com

Južna Hrvatska
Slobodan Lovrić
mobitel: +385 91 15 71 256
email: slobodan.lovric@uralita.com

Slavonija i istočna Hrvatska:
Franjo Tančik
mobitel: +385 91 13 73 590
email: franjo.tancik@uralita.com

Tehničko savjetovanje za područje Hrvatske
Krešimir Kasić
mobitel: +385 91 377 21 16
email: kresimir.kasic@uralita.com

SOLAR SERDAR
solarserda@gmail.com