Solarna elektrana Kukuljanovo

 

Tvrtka Adria Sol iz Kukuljanova, nedaleko Rijeke, izgradila je na krovu pogona za preradu soli u Industrijskoj zoni Kukuljanovo do sada najveću solarnu elektranu u Hrvatskoj, ukupne snage 283 kWp.

Objekt na čijem krovu se nalazi ovaj fotonaponski sustav u vlasništvu je grupe Ma.Co.T. s kojom je Adria Sol vlasnički povezana.

MA.CO.T. je započeo s radom 1992 godine, te se tijekom posljednih 15-ak godina profilirao u tvrtku koju poznaju i prepoznaju kao jednoga od glavnih dobavljača soli u Republici Hrvatskoj te u susjednim zemljama.
Sjedište tvrtke je u Industrijskoj zoni Kukuljanovo u zaleđu Rijeke u neposrednoj blizini luka Rijeka i Bakar, autoceste Rijeka Zagreb te čvorišta prema Splitu. Krajem 2005. otvoren je naš nov distribucijski centar u čijem sklopu je i skladište soli zatvorenog tipa površine 3.000 m2.

Karakteristike Solarne elektrane Kukuljanovo:

 Ukupna investicija prelazi 500 tisuća eura, a povrat investicije očekuje se nakon 6 godina. Svu proizvedenu električnu energiju elektrana predaje u elektroenergetsku mrežu. Očekivana godišnja proizvodnja iznosi više od 300 tisuća kWh, što bi, primjerice, bilo dovoljno za opskrbu oko 100 kućanstava električnom energijom.

Osim ovog projekta Adria Sol instalirala je još veću solarnu elektranu (315 kWp) u Gospodarskoj zoni Čaporice, nedaleko Trilja, također na krovu u vlasništvu grupe Ma.Co.T. te se uskoro očekuje puštanje u rad, odnosno priključak na elektroenergetsku mrežu. Za gradnju Solarne elektrane Čaporice korištena je ista tehnologija i oprema kao i za Solarnu elektranu Kukuljanovo. Administrativna procedura potrebna za realizaciju ovih projekata trajala je skoro godinu dana.

Nadalje, Adria Sol planira i skori završetak nekoliko manjih solarnih elektrana na krovovima obiteljskih kuća.

Tehničke karakteristike Solarne elektrane Kukuljanovo:
 
Fotonaponski sustav ukupne snage: 282,94 kWp
Očekivana godišnja proizvodnja: oko 300.000 kWh
Prinos prema mikrolokaciji elektrane: 1080 kWh/kWp
Solarni paneli: Day4Energy 235 W, polikristalni, 1204 komada
Izmjenjivači: Fronius CL 60kW, 4 komada
Smanjena emisija CO2: oko 150 tona/god.
Krovna površina koju elektrana zauzima:  2000 m2

 Iz tvrtke napominju da je administrativna procedura potrebna za realizaciju ovih projekata trajala skoro godinu dana, te dodaju kako bi bilo korisno za hrvatsko gospodarstvo da se administrativna procedura ubrza te da traje maksimalno par mjeseci, kao što je slučaj u EU. Iz Adria Sol-a najavljuju i skori završetak nekoliko manjih solarnih elektrana na krovovima obiteljskih kuća, prenosi Hina.

Hrvatski Centar Obnovljivih Izvora Energije (HCOIE)

SOLAR FIELDS - SOLAR SERDAR (CCRES)

Siemens Solar Fields

promoted by

Croatian Center of Renewable Energy Sources (CCRES)

1. Solar energy is concentrated by the mirrors onto the receivers. Solar collectors rotate to maximize the capture of solar energy
2. Heat transfer fluid (HTF) is circulated and heated through the solar field loops. Cooled HTF returns for reuse
3. Oil pumps circulate the oil through the solar field
4. Heat exchangers forward the thermal energy from the HTF system to the water/steam (W/S) system
5. The W/S cycle transfers the thermal energy from the heat exchangers to the steam turbine
6. The steam turbine converts thermal energy to electric power
7. The cooling tower cools the water cycle
8. Clean power is delivered to the end users via the power grid
9. Central control optimizes solar power plant operations.
More info at http://solarserdar.blogspot.com/

Solar fields generate clean, carbon-free, renewable energy from an endless resource. They contribute to a more sustainable and ecologically sound power generation landscape. However, like any other power generation project, solar fields are, first and foremost, expected to perform at maximum levels and generate revenue. That is why they must prove their inherent financial feasibility before implementation.

However, sound project planning can easily become problematic due to the technical complexity of a solar field. If all of the critical solar components are delivered from multiple sources and providers, both delivery and performance risk can increase.

The SunField LP from Siemens is a groundbreaking solar field concept designed to address these issues. Its vertically integrated concept can help reduce project risks and reduce costs considerably for both investors and EPCs. It can enable more precise cost control, performance optimization of the entire trough, streamlined construction and an outstanding degree of electrical production at an excellent price/performance ratio.

Siemens manufactures and supplies all of the relevant solar field components, from solar receivers to parabolic reflectors and solar collector assemblies (SCA). As a single source supplier for an entire solar field, Siemens takes advantage of its decades of research and development in solar power, as well as its significant experience in testing, calibrating and optimizing parabolic trough performance.

The result is a reliable, highly efficient solar field solution based on commercially proven technology. As such, the SunField LP can suit investors’ and EPCs’ operational and financial models and promote bankability.More info at http://solarserdar.wordpress.com/

A solar field collects sunshine, concentrates it, converts it into thermal heat, and, finally, into electrical power. While this working principle may seem simple, it requires precise engineering and thorough research and development efforts to optimize the energy yield of the solar fields and turn solar power generation into an environmentally and economically beneficial option.

The SunField LP builds upon Siemens’ long-standing engineering experience with solar fields, as well as decades of on-site testing and integration at the commercially operational solar thermal facilities in California and various test facilities. Through many years of experience and modeling, Siemens has developed optimized solar field sizes and configurations. All key components of the Siemens SunField LP are precisely harmonized and coordinated with one another in order to obtain highest efficiency.
More info at http://solarserdar.blogspot.com/

The SunField LP package also includes important planning elements, including solar field design and engineering and design coordination. In addition, Siemens also offers power plant operations and maintenance services to help maximize the operational integrity of the SunField LP.

The basic component of the SunField LP solar field is the Siemens solar collector assemblies (SCA), a metal parabolic framework designed to hold the receiver and reflector panels in place and keep them perfectly aligned.

Line-based production for all components and processes, rather than the project-based approach employed by other providers, helps provide the Siemens SCA with the high accuracies necessary for optimal electricity production,and can enable fast and simple assembly and installation.

The SCA includes the latest advances in high torsion stiffness, vibration damping, high stiffness against bending, and corrosion resistance. These advances are important for consistent maximum optical efficiency. A hydraulic drive pylon and control system enable the SCA to precisely track the sun over the entire course of the day.

The parabolic reflector panels are made up of hot-formed mirrored glass panels supported by a truss system that gives the solar collector assembly its structural strength. To increase the transmissivity for solar radiation, the reflecting panels with their silver-based mirror coating are made of special glass with a particularly low iron content. The reflector panels need to be built to the highest standards of precision and durability, as even the slightest degradation can potentially impair the overall efficiency of the power plant.More info at http://solarserdar.wordpress.com/

The UVAC 2010 is designed for extremely low heat loss and high transmissivity. It is characterized by its superior thermal efficiency, which helps significantly increase the electrical output of a solar power plant. Its optical and thermal properties provide for outstanding heat creation compared to other available receivers.

The UVAC 2010 is composed of a selectively coated stainless steel tube within an anti-reflective evacuated glass tube. The UVAC 2010 includes Siemens’ patented vacuum maintenance unit and the anti-”fluorescent phenomenon” coating, designed to provide stable performance over time, even under extreme conditions.

A specially designed, advanced field control system assures the efficient collection of solar radiation. At the core of this system is a specialized sun position sensor. It enables precise tracking and focus of the sun’s rays onto the UVAC, and periodically sends commands to a drive system designed to position the SCA for optimal effect. The control system consists of local microprocessor controllers on each SCA and a field supervisory controller in the central control building, where the operators monitor the status of each SCA and all operational values, including solar insolation, wind velocity and HTF temperature. An interactive user interface contributes to the system for userfriendliness and responsiveness.More info at http://solarserdar.blogspot.com/

Siemens has designed a complex solar field operational model to complement the SunField LP. The model simulates the operating modes of the solar field, uses meteorological data to perform a heat balance calculation at certain time intervals throughout the year, and provides a calculated estimate of potential output over the lifetime of the power plant. Optical interaction factors, transient conditions, start-ups and changing weather conditions are all taken into consideration. The results are provided in terms of yearly and hourly values, and are verified and calibrated on the basis of results from various plants in operation.

For more information please contact Siemens Customer Support Center:

Phone: +49 (0)180 524 70 00

Fax: +49 (0)180 524 24 71

Siemens AG
Energy Sector

Freyeslebenstrasse 1
91058 Erlangen
Germany

support.energy@siemens.com

Croatian Center of Renewable Energy Sources (CCRES)

Željko Serdar
Head of business association
solarserdar@gmail.com

CCRES promote ALLIANCE FOR RENEWABLE ENERGY

CROATIAN CENTER of RENEWABLE ENERGY SOURCES

promote

ALLIANCE FOR RENEWABLE ENERGY

ARE, the Alliance for Renewable Energy, with a focus on North America, is an alliance of policymakers, renewable energy experts, citizens, research institutions, and large and small businesses that came together in the Spring of 2008. Our goal is to rapidly increase the shift from fossil fuels to clean, renewable energy. Our strategy is to create awareness of and build support for ‘the world’s most effective renewable energy policies’—Feed-In Tariffs (FITs).

Members of ARE - Businesses, non-profit organizations, individuals and students have joined ARE in its mission to promote REPs. If you are interested in joining ARE, please visit the "Join ARE" page.

ARE Steering Committee, Advisory Board, and Staff - The Steering Committee is made up energy experts, academics, policy makers, and renewable energy leaders in businesses, non-profit organizations, and research institutes. It is co-chaired by Lois Barber and Paul Gipe. The Advisory Committee provides valuable insights and information. The Staff keep it all running smoothly.More info at http://solarserdar.blogspot.com/

Join ARE
The mission of the Alliance for Renewable Energy (ARE) is to build support in North America for Feed-in Tariff (FIT) policies in order to rapidly increase our shift from fossil fuels to clean renewable energy.

Individuals, businesses, educational institutions, and other organizations that support ARE’s mission are invited to join. When you become a member we will list your name on the "Members" page unless you request otherwise.

Benefits of Joining ARE

Alliance members will:

• receive regular updates on FIT policy developments

• be invited to engage in dialogues and meetings with other members to exchange information, develop materials, discuss strategy, and plan and carryout campaigns

• be invited to attend ARE workshops, conferences and fact-finding trips

• be listed on our website and printed materials (unless they prefer anonymity)

Membership Dues:

Membership dues will be used to build support for FIT policies in North America. This will include: conducting research and publishing reports; developing and distributing materials; sponsoring workshops and informational sessions for policymakers, representatives of utilities, businesses and others; giving presentations at selected conferences and hearings; organizing fact finding trips to states and countries with successful FIT policies; creating our website; marketing our message; and building the Alliance. More info at http://solarserdar.wordpress.com/

Contact
Please direct all your non-website-related questions, comments, and suggestions to contact(at)earthaction.org. EarthAction is one of the founding organizations of ARE, and is in charge of keeping the website up to date and ensuring that all communications are directed to the correct person(s).

If you have any questions about the website or desire to submit articles or other FIT-related information, please contact us at webmaster(at)earthaction.org.

Feel free to write us or call us as well, at

Alliance for Renewable Energy (ARE)
PO Box 63
Amherst, MA 01004

Street Address (for courier deliveries only)
44 N. Prospect Street
Amherst, MA 01002

Telephone: (413) 549-8118
Fax: (413) 256-8871

CROATIANCENTER of RENEWABLE ENERGY SOURCES (CCRES)

Željko Serdar
Head of business association

solarserdar@gmail.com

SOLAR SERDAR recommends J-POWER

Providing power to Japan and the world backed by half a century of experience

J-POWER can look back on a proud history spanning over half a century as an electric power wholesaler with a proven track record of reliable, low-cost power supply. The nationwide network of power transmission trunk lines we have built and operate has made a significant contribution to Japan’s economic development and the improvement of living standards in Japan. In October 2004, we were listed on the First Section of Tokyo Stock Exchange and this completed our transformation to a private sector company in all aspects.

Our performance records as of July 2009 show that we have built and operate 67 power plants with a total output capacity of 16,985 megawatts and a transmission network of about 2,400 kilometers of power lines.

As part of our international commitment, since 1960 we have carried out 300 consulting service projects with 63 countries and regions mainly from the developing world. This has included surveying, design and construction supervision of hydroelectric and thermal power development as well as electric power consulting relating to environment protection measures. Recently, we have become engaged in a wide range of global operations such as IPP (Independent Power Producer) projects.

In recent years, we have experienced an adverse operating environment and dramatic changes in our operating environment, due mainly to slower growth in electric power demand, further deregulation in our industry and global warming. At the same time, this change has created new business opportunities. We will strive to enhance our corporate value by reinforcing our competitiveness in electricity wholesaling and building solid revenues and earnings foundations. We will also establish new operations based on the principle of effective coexistence between energy and the environment.
More info at solarserdar@gmail.com.
This page briefly outlines to potential suppliers the product procurement procedures of Electric Power Development Co.,Ltd. (J-POWER/EPDC). J-POWER/EPDC welcomes new prospective suppliers from overseas, as well as in Japan, who will supply products of high quality and a fair price.
J-POWER/EPDC hopes this home page will help establish good relationships between our suppliers and ourselves.

Contact Point
For more information regarding product procurement activities and procurement procedures of J-POWER/EPDC, please feel free to contact the following:

Equipment & Construction Contracting Office
Accounting & Finance Dept
Electric Power Development Co., Ltd.
Address : 15-1, Ginza 6-chome, Chuo-ku, Tokyo 104-8165, Japan
Telephone : +81-3-3546-2211 (Switchboard)
Facsimile : +81-3-3544-1819

Procurement After J-POWER Group Restructuring
Under the scheme of J-POWER Group company restructuring, hydro-power & transmission system company, thermal power company, and service company, have been formed and started their operation from April 1, 2004.
Because of this restructuring, the part of the tasks for contracting and procuring equipment & materials, which are necessary for the operation and maintenance of power facilities, became administered by the following J-POWER Group companies.
If there is any request for contacting those companies for business transaction, product introduction, or procurement procedural inquiry, please contact the above contact address, thereby the appropriate person of the following companies will be introduced.

JPHYTEC Co., Ltd. (hydro-power & transmission system company)
JPec Co., Ltd.(thermal power company)
JP Business Service Corporation(service company)
KEC Corporation
Procurement Information on Construction Services
There is no principal construction program.

Public Offering
There is no public offering information

E-Mail to Equipment and International Contracts Group
If you have any inquiries on our procurement procedure or wish to introduce your products to us, please send them by inquiry form.
More info at solarserdar@gmail.com.
J-POWER has an engineering consulting wing, active worldwide since early 1960s. Through its successes in more than 300 projects in 63 countries and regions,J-POWER has gained a worldwide reputation as one of the leading consulting firms in the field of electric power development and related fields.

J-POWER is increasingly joining in investment in IPP corporations, particularly in Asia. The company will expand the discovery of these opportunities in the future, and expand its presence in project management through an increased level of investment. Combined with a more active involvement in maintenance and other areas, these activities are intended to increase J-POWER's profitability.
Croatian Renewable Energy Center
SOLAR SERDAR
solarserdar@gmail.com

SOLAR SERDAR & U.S. GREEN BUILDING COUNCIL

SOLAR SERDAR & USGBC URGES SENATE TO PASS COMPREHENSIVE CLIMATE AND ENERGY POLICY
As the Senate takes up climate and energy legislation this year, the U.S. Green Building Council & SOLAR SERDAR urges Members to pass a comprehensive bill that will move us away from dependence on fossil fuels and toward a clean energy future.

GREEN BUILDINGS FOR CLIMATE PROTECTION
Buildings are part of the solution. While accounting for nearly 40% of our country’s carbon footprint, the building sector also serves as a low-cost, high-return investment strategy to reduce energy consumption and associated emissions, yet their potential remains largely untapped. McKinsey and Company estimates that increased efficiency would save the U.S. economy $130 billion per year, while reducing emissions by 1.1 gigatons a year. Moreover, programs dedicated to spur the retrofit of old, inefficient homes and buildings will create jobs and save consumers money.

For these reasons, USGBC & SOLAR SERDAR strongly urges the inclusion of the following measures in climate and energy legislation; most of which have significant bipartisan support:

EXISTING BUILDING RETROFITS. A residential and commercial green retrofit program, such as the Retrofit for Energy Efficiency Program (REEP) included in the Clean Jobs and American Power Act (S. 1733), or a combination of the Home Star Energy Retrofit Act of 2010 (S. 3434) and the Building Star Energy Efficiency Act of 2010 (S. 3079). These programs are estimated to create over 300,000 jobs over two years.

IMPROVED BUILDING CODES. A program to strengthen and enforce building energy codes, with efficiency targets that build upon those in the American Clean Energy Leadership Act (ACELA) and are increased incrementally over time. The adoption of codes with higher energy efficiency targets has the potential to save building owners in the U.S. over $4 billion per year in 2015, according to DOE.
More info at solarserdar@gmail.com

ENERGY PERFORMANCE DISCLOSURE. The creation of a national, voluntary program for effective benchmarking and disclosure of building energy performance for a diverse set of building types, such as what is already included in ACELA . In order to impact the 125 million existing buildings in America, the labeling program implementation should apply to existing building stock as well as new construction.

WATER EFFICIENCY. Authorization of a national program such as WaterSense to identify and promote water-efficient devices; authorization of federal procurement of such devises; and state incentive programs as described in S. 1733. According to the EPA, if one out of every 100 homes in the U.S. were retrofitted with water-efficient fixtures, we could save 100 million kWh of electricity per year—the GHG reduction equivalent of removing nearly 15,000 automobiles from the road.
Furthermore, legislation should contain aggressive national goals and funding for complimentary measures that 1) unlock efficiency and clean power such as an Energy Efficiency Resource Standard and a Renewable Electricity Standard; 2) reduce oil consumption, by promoting transportation efficiency and transit-orientated development; and 3) facilitate global emission reductions through international clean energy deployment and technology cooperation for developing countries.
More info at solarserdar@gmail.com

SOLAR SERDAR and USGBC urges the Senate to pass a comprehensive climate and energy package in 2010 that contains emission targets based on science, invests in a clean energy future and gives back to American communities. Investments in building efficiency now will create jobs, save money for consumers and businesses, reduce emissions, and unleash technology innovation.

For more information, contact Croatian Center of Renewable Energy Sources and
SOLAR SERDAR at solarserdar@gmail.com and
USGBC Advocacy Staff at publicpolicy@usgbc.org.

SOLAR SERDAR -SOLARNI PAKETI cjenik

SOLAR SERDAR
Vakuumski cijevni kolektor VTK 570 ; neto: 1m2 auroTHERM exclusiv VTK 570
VPC kn 4.957,84 MPC kn 6 .048,56
Vakuumski cijevni kolektor VTK 1140 ; neto: 2m2 auroTHERM exclusiv VTK 1140
VPC kn 9.915,68 MPC kn 12.097,12
Spojni set za instaliranje modula (izolacija i pokrov za spoj kolektora)
VPC kn 388,85 MPC kn 4 74,40
Produžni modul za spajanje šina
VPC kn 291,64 MPC kn 3 55,80
Priključni set - hidraulički adapter s izolacijom (15x3/4 2kom., prehod iz DN 15 na 3/4)
VPC kn 194,43 MPC kn 2 37,20
Set za instalaciju na kosi krov 2 kolektora VTK 570 ili 1 VTK 1140
VPC kn 1.244,32 MPC kn 1 .518,07
Set za instalaciju na kosi krov 3 kolektora VTK 570 ili 1 VTK 1140 i 1 VTK 570
VPC kn 1.691,50 MPC kn 2 .063,63
Set za instalaciju na ravni krov 2 kolektora VTK 570 ili 1 VTK 1140
VPC kn 797,14 MPC kn 9 72,51
Set za instalaciju na ravni krov 1 kolektora VTK 570
VPC kn 486,06 MPC kn 5 93,00
Set konzola za instalaciju kolektora na crijep od škriljevca-4 kom.
VPC kn 544,39 MPC kn 6 64,16
Set dugih vijaka za instalaciju na klasičan crijep ili Berliner-4 kom.
VPC kn 651,32 MPC kn 7 94,61
Okvir za montažu VTK kolektora na ravni krov
VPC kn 1.312,37 MPC kn 1 .601,09
Ploča za učvršćenje okvira za montažu VTK kolektora na ravni krov (309630)
VPC kn 923,52 MPC kn 1 .126,69

SOLARNI PAKETI

Solarni paket 1 PRO - instaliranje na kosi krov
sp1pro* sp1pro (2 kom.VFK 145V.; VIH S 300; cijevna grupa; tekućina 20 lit.; exp.posuda 18 lit, prihvatna kompenzacijska posuda 5lit.;pribori za instaliranje na kosi krov) kn 18.285,67 kn 2 2.308,52
Solarni paket 1 PLUS - instaliranje na kosi krov
sp1plus* sp1plus (3 kom.VFK 145V.; VIH S 300; cijevna grupa; tekućina 20 lit.; exp.posuda 18 lit, prihvatna kompenzacijska posuda 5lit.;pribori za instaliranje na kosi krov) kn 22.533,86 kn 2 7.491,31
Solarni paket 2 PRO - instaliranje na kosi krov
sp2pro* sp2pro (3 kom.VFK 145V.; VIH S 400; cijevna grupa; tekućina 20 lit.; exp.posuda 25 lit, prihvatna kompenzacijska posuda 5lit.;pribori za instaliranje na kosi krov) kn 25.071,10 kn 3 0.586,75
Solarni paket 2 PLUS - instaliranje na kosi krov
sp2plus* sp2plus (4 kom.VFK 145V.; VIH S 400; cijevna gr.; tekućina 20 lit.; exp.posuda 35lit, prihvatna kompenzacijska posuda 5lit.;pribori za instaliranje na kosi krov) kn 29.329,01 kn 3 5.781,39
Solarni paket 3 PRO - instaliranje na kosi krov
sp3pro* sp3pro (4 kom.VFK 145V.; VIH S 500; cijevna grupa; tekućina 20 lit.; exp.posuda 35 lit, prihvatna kompenzacijska posuda 5lit.;pribori za instaliranje na kosi krov) kn 30.991,35 kn 3 7.809,44
Solarni paket 3 PLUS - instaliranje na kosi krov
sp3plus* sp3plus (5 kom.VFK 145V.; VIH S 500; cijevna gr.; tekućina 20+20 lit.; exp.posuda 50lit, prihvatna kompenzacijska posuda 5lit.;pribori za instaliranje na kosi krov) kn 36.308,87 kn 4 4.296,82
Solarni paket 4 PLUS - instaliranje na kosi krov
sp4plus* sp4plus (5 kom.VFK 145V.; VPS SC 700; cijevna gr.; tekućina 20+20 lit.; exp.posuda 50lit, prihvatna kompenzacijska posuda 12lit., VRS 620/2, 3xVR10, kn 42.774,17 kn 5 2.184,49
pribori za instaliranje na kosi krov)
Solarni paket 5 PLUS - instaliranje na kosi krov
sp5plus* sp5plus (8 kom.VFK 145V.; VPS S 100; TVS 40, cijevna grupa.; tekućina 20+20 lit.; exp.posuda 80lit, prihvatna kompenzacijska posuda 12lit., VRS 620/2, kn 69.614,55 kn 8 4.929,75
pribori za instaliranje na kosi krov)
Solarni paket 6 PRO - instaliranje na kosi krov
sp6pro* sp6pro (1 kom.VTK 570, 1 kom VTK 1140.; VIH S 300; cijevna grupa; tekućina 20 lit.; expanzijska posuda 25 lit; brzo odzračni lončić; prihvatna kompenzacijska kn 24.147,59 kn 2 9.460,05
posuda 5lit, pribori za instaliranje na kosi krov)
Solarni paket 6 PLUS - instaliranje na kosi krov
sp6plus* sp6plus (2 kom VTK 1140.; VIH S 300; cijevna grupa; tekućina 20 lit.; expanzijska posuda 25 lit; brzo odzračni lončić; prihvatna kompenzacijska kn 29.299,85 kn 3 5.745,81
posuda 5lit, pribori za instaliranje na kosi krov)
Solarni paket 7 PRO - instaliranje na kosi krov
sp7pro* sp7pro (2 kom VTK 1140.; VIH S 400; cijevna grupa; tekućina 20 lit.; expanzijska posuda 25 lit; brzo odzračni lončić; prihvatna kompenzacijska kn 31.701,00 kn 3 8.675,22
posuda 5lit, pribori za instaliranje na kosi krov)
Solarni paket 7 PLUS - instaliranje na kosi krov
sp7plus* sp7plus (2 kom VTK 1140, 1 kom VTK 570.; VIH S 400; cijevna grupa; tekućina 20 lit.; expanzijska posuda 25 lit; brzo odzračni lončić; prihvatna kompenzacijska kn 36.532,46 kn 4 4.569,60
posuda 5lit, pribori za instaliranje na kosi krov)
Solarni paket 8 PRO - instaliranje na kosi krov
sp8pro* sp8pro (3 kom VTK 1140.; VIH S 500; cijevna grupa; tekućina 20+10 lit.; expanzijska posuda 35 lit; brzo odzračni lončić; prihvatna kompenzacijska kn 43.599,81 kn 5 3.191,76
posuda 5lit, pribori za instaliranje na kosi krov)
Solarni paket 8 PLUS - instaliranje na kosi krov
sp8plus* sp8plus (3 kom VTK 1140, 1 kom VTK 570.; VIH S 500; cijevna grupa; tekućina 20+10 lit.; expanzijska posuda 35 lit; brzo odzračni lončić; prihvatna kompenzacijska kn 48.431,27 kn 5 9.086,15
posuda 5lit, pribori za instaliranje na kosi krov)
*potrebno odabrati dodatni pribor: u ovisnosti o vrsti pokrova krova (krovni nosači za crijep tipa Tondach/Bramac, Biber, za ostale tipove),
regulaciju (VRS 560/2 ili VRS 620/2), termostatske ventile, električne grijače (2 ili 6kW), sigurnosnu grupu, automatski odzračni sustav,
hidraulički blok (309640)...
*paketi nisu zamjena za projektiran sustav, paketi su rađeni po pretpostavci da je kolektorsko polje usmjereno na južnu stranu s nagibom 30-45°,
paketi 1-5 su za okomitu izvedbu kolektorskog polja, srednja godišnja suma ozračenosti vodoravne plohe u RH iznosi 1,15-1,6 MWh/m2,
specifikaciju opreme za vodoravnu izvedbu kolektorskih polja i za ugradnju u krov i na ravni krov šaljemo na upit

SOLAR SERDAR
solarserdar@gmail.com
http://solarserdar.wordpress.com

SOLAR SERDAR recommends SMA Solar Technology

SOLAR SERDAR
recommends SMA Solar Tehnology

Company Profile
About SMA America, LLC

SMA America, LLC is the U.S. subsidiary of SMA Solar Technology AG, based in Germany. With over three gigawatts installed, SMA is the world leader in solar inverter technology and manufacturing with divisions in nine countries on four continents. SMA is committed to its leadership role, offering exceptional value with the most efficient and reliable solar inverters in the industry. SMA takes special pride in promoting renewable energy solutions at all levels, through education, information and support for the general public, solar installers as well as small and large businesses worldwide.

About SMA Solar Technology AG

SMA Solar Technology AG develops, produces and sells solar inverters and monitoring systems for photovoltaic applications. SMA is the world’s largest producer in this segment and is the only vendor that has a product range with the matching inverter type for any module type and any power class. This applies for grid tied applications as well as island and backup operation.

The inverter is technologically the most important component in any solar power system: it converts the direct current generated in photovoltaic cells into alternating current suitable for the grid. In addition, it is an intelligent system manager, responsible for yield monitoring and grid management. Solar inverters are characterized by a particularly high efficiency. The Sunny Mini Central produced by SMA already has an efficiency of over 98 %, which allows for increased electricity production.

SMA’s business model is driven by technological progress. Due to its flexible and scalable production, SMA is in a position to quickly respond to customer demands and promptly implement product innovations. This allows the Company to easily keep pace with the dynamic market trends of the photovoltaic industry and at the same time absorb short-term fluctuations in demand for solar inverters.

SMA Solar Technology AG is headquartered in Niestetal, near Kassel, and is represented by sales and service subsidiaries on four continents in thirteen countries. This group of companies employs more than 5,500 employees (incl. temporary staff) and has been distinguished several times in previous years with awards for its outstanding performance as an employer. Since June 27, 2008, the Company has been listed in the Prime Standard of the Frankfurt Stock Exchange (S92), and since September 22, 2008, the Company’s shares have been listed in the TecDAX. In 2009, SMA generated an earnings before interest and taxes (EBIT) of more than € 228 million from a turnover of more than
€ 934 million. This corresponds to an EBIT margin of over 24 %.

Technological Leaders
As technological leaders, we know what our clients want: SMA develops and manufactures highly efficient solar inverters for any installation size, all power classes and any specifications worldwide, regardless of the type of solar modules.

Unequaled for innovation
Whether it is the Electronic Solar Switch, OptiTrac or H5-Topology: with our speed for innovation we leave others far behind us. A development team with 450 members and at least five innovations a year speak for themselves.

Cooperative
13 foreign subsidiaries on four continents: we are a strong partner for our clients worldwide. With the Sunny PRO Club and the SMA Solar Academy. And an exceptional service concept.

Reliable.
Either one has it or not: experience is irreplaceable. In our case it consists of 29 years in systems technology for photovoltaics. Perhaps this is the reason why our inverters are more reliable and long-lived than any other device on the market.

Grid-Tied Inverters
------------------------
SMA Inverters – The Heart of Every Solar Power System

Harness the energy of the sun – with a solar inverter from SMA. Inverters convert the direct current electricity generated by solar panels info grid-compatible alternating current. They are the heart of every solar power system.

As the global leader in solar inverters, SMA is continually on the cutting-edge: industry-leading efficiencies of 98% and superior German engineering ensure reliable and carefree operation.

From kilowatt to megawatt, we offer you the right device for any application, regardless of module type or grid connection status.

SUNNY BOY
For small and mid-range systems

The Sunny Boy solar inverters characterize the Technology- and Quality-Leadership of our company. They are optimally suitable for use in small and mid-range systems. They impress with first class efficiency, user-friendliness and reliability.

The Sunny Boys have been repeatedly acclaimed - and are constantly developing. Our new Generation come with innovative technologies such as OptiTrac and H5-Topology. These make the device even more efficient - and therefore ensure a very good solar yield.

SUNNY TOWER
The flexible solution for commercial PV systems

SMA brings you the best in commercial inverter solutions: the Sunny Tower. Designed with the installer in mind, we’ve combined ease of installation, lowest specific cost ($/watt), and the highest efficiency to maximize rebates and power production while minimizing your payback period. The Sunny Tower combines all the advantages of string inverters with the installation advantages of central inverters. The Sunny Tower offers you the flexibility and reliability you’ve come to expect from SMA.

Central Inverters
SUNNY CENTRAL
- High Tech for solar power stations

We have developed the Sunny Centrals specially for use in large PV power stations and open-field plants. Hence they possess completely special properties. String monitoring, capacity for teamwork and the ability to feed into the medium-voltage power grid make them first choice for PV systems with homogenous structure.

The Sunny Centrals are easy to install - indoors as well as outdoors. With peak efficiencies of over 98 % they belong to the most efficient central inverters on the market. maximum reliability and durability furthermore ensures the greatest investment security.More info at http://solarserdar.wordpress.com

Off-Grid Inverters
-----------------------
SUNNY ISLAND – The Versatile System Manager

The Sunny Island offers you an innovative solution for the installation of self-sufficient energy systems. In conjunction with a battery pack, the devices form a high quality, stand-alone AC voltage grid.

In the Sunny Island system, electricity generators and consumers are integrated. PV and wind energy systems, diesel devices, water or CHP (Combined Heat and Power) can be AC coupled as conventional 120 volt consumers.

The Sunny Island offers installers two decisive advantages. During system planning and layout, you enjoy premium versatility. During installation, complex DC cabling is not required.

SUNNY ISLAND 5048 / 5048USThe Island Manager

Commissioning within minutes: the Sunny Island 5048 makes it possible. All required operational settings can be made quickly and easily in just a few steps. The Sunny Island 5048 is flexible in its application, extendable and takes on all control processes. Its first-class battery management ensures maximum battery life. In addition, the device features an impressive high-efficiency, ergonomic die-cast aluminum enclosure and an OptiCool active cooling system. The Sunny Island is also available in a UL-compliant 5048-US version with an output rating of 120 V and 60 Hz for the North American market.

SUNNY ISLAND 3324 / 4248 / 4248USStand-alone grids easier than ever

Easy installation, safe operation and outstanding price-performance ratio: the Sunny Island 3324 and 4248 battery inverters are especially suitable for use in small and mid-sized stand-alone grids. The Sunny Island 4248-US model is available for countries with voltage systems compatible with the U.S. standard. The devices guarantee a reliable and high-quality power supply. Due to their outstanding overload capabilities and the fact that they are designed to withstand high ambient temperatures, these devices can be used under extreme weather conditions.More info at http://solarserdar.wordpress.com

Wind Energy
WINDY BOY

– Grid-Connected Small Wind Energy Inverters
-----------------------------------------------------------

The grid-coupling of small wind energy plants is simpler than ever - with the Windy Boy from SMA. It converts the variable frequency voltage from wind generators into grid-conforming AC voltage. The energy can then be used, with excess energy being fed back into the main utility grid. The Windy Boy works in perfect tandem with the Sunny Island, creating stand-alone grids for the electrification of remote areas.

The Windy Boys are suitable for wind generators from a wide variety of manufacturers and power classes. They guarantee an optimal power adjustment and very high energy yields.

They are also versatile and optimally suited for worldwide use – enclosed in a protective housing, the SMA Grid Guard disconnection device, the electric separation to the grid along with an automatic 50 or 60 Hz recognition.

WINDY BOY 5000-US / 6000-US / 7000-US / 8000-USA cost-effective option with UL certification

Maximum energy yields for a growing market: the Windy Boy inverters for countries with UL certification feature premium efficiency. They are easy to combine, and more than one device can be operated on a single wind power plant, which makes it possible to easily connect plants with higher power to the grid. The automatic grid voltage detection* allows for a straightforward and secure installation. The galvanic isolation also ensures safety as well as flexible connection options. The weather-proof enclosure and the wide temperature range allow for installation at almost any location. Four devices, a single technology: the best choice for small wind plants over 5 kW.

WINDY BOY 3000-USA reliable option with UL certification

User-friendly, safe and reliable: the Windy Boy 3000-US is specially certified for the US market. The automatic grid voltage detection* allows for a straightforward and secure installation. The aluminum die-cast enclosure and the OptiCool active cooling system ensure optimal yield as well as a long lifespan, even under adverse operating conditions. More info at http://solarserdar.wordpress.com

Monitoring Systems
Keep Every Cent – Continually Monitor System Performance
-------------------------------------------------------------------------

With the decision to install a PV system, your customers also commit to a long-term investment. This means that it is essential that the system function smoothly at all times.

Our products for system monitoring offer you a wide range of possibilities: wireless or Internet-based, compact or complex, concise or elaborate. Regardless of whether you want to monitor the yield of a home roof system or of an open-field solar power station, you will find the perfect solution for every application with SMA Monitoring.

SUNNY BEAM with Bluetooth® Wireless Technology
The all-in-one service package for the home

Informative, compact, and easy to operate: Sunny Beam with Bluetooth doesn't just look good, it's an innovative monitoring solution. The key data is visible on its large graphic display: daily profile, current output, as well as daily and total energy yield. The performance of up to 12 inverters, the monthly overview, the energy yield in euros, and the CO2 savings can all be accessed with one hand. Data for a minimum of 90 days is stored in the device and can be transmitted to a PC via a USB cable – without an Aadditional program. And in the event of errors, the Sunny Beam can also be set up to emit an acoustic signal.

SUNNY WEBBOX
Remote monitoring and maintenance of large solar power plants

System monitoring, remote diagnosis, data storage and visualization: the Sunny WebBox is the high-performance communication hub for medium- to large-scale solar power plants. It continuously collects all the data from the inverters on the system side, thereby keeping you informed of the system‘s status at any given time. The Sunny WebBox is a multi-functional, energy-efficient data logger which offers a wealth of options for displaying, archiving and processing data, even in networks with strict security regulations. In case of the event “Error”, the WebBox informs you immediately by e-mail or text message*. Even from remote locations where no DSL or telephone connection is available, measurement data can be transmitted to the Sunny Portal via a GSM modem.

SUNNY PORTAL
Professional management, monitoring and presentation of PV systems

Whether for a small home system or a large solar park – central administration and monitoring of several PV plants saves time and money. Plant operators, installers and SMA service technicians have access to key data at any time, from any location. Pre-configured standard pages can be easily customized or supplemented with individually designed pages. Whether as a data table or as a highly configurable diagram: SMA solutions allow almost infinite options for analyzing measured data or visualizing yields. The yields of all inverters in a plant are compared fully automatically, permitting detection of even the smallest deviations. And the powerful reporting functions provide regular updates via E-mail to help insure yields.

More information: www.SunnyPortal.com

SUNNY SENSORBOX
The weather station for PV plants

The Sunny SensorBox is installed directly onto the modules and measures the sun radiation and temperature. In combination with Sunny WebBox and Sunny Portal, it provides a continuous target-actual comparison of plant performance. This makes it possible to detect shade, dirt, and gradually declining performance in a generator and thus maximizes yield security. Additional sensor for optional measurement of ambient temperature or wind speed permit more precise calculations.More info at http://solarserdar.wordpress.com

Software
--------------
Free design and presentation support

Whether you need data archiving, a visual format to display your energy production or system design support, our software offers a solution. It is suitable for all system sizes, is easy to use, and is configured to work seamlessly with other SMA components.

We gladly provide our software to download free of charge.

SUNNY EXPLORER
The free PC software solution

Switch on your laptop or PC, activate the Bluetooth interface, and start Sunny Explorer – that's all that's needed to give operators and installers an overview of their PV plant. The free PC software is thus the optimum addition to the new generation of inverters with integrated Bluetooth. The key plant data can be visualized on the PC or laptop – quickly and wirelessly with Bluetooth. Energy values and events can be archived long-term by means of data export in CSV format, and processed and visualized in Excel. Sunny Explorer also provides support during inverter parameterization: because no complicated cabling is needed, PV plant maintenance is convenient and fast.

SUNNY DESIGN
System design made easy

With Sunny Design, the design of solar systems is easier than ever: simply enter all required details and within a few minutes you will receive the optimal system configuration. The free software gives installation engineers and system planners a user-friendly interface, and a practical input wizard helps with any questions. The software delivers data for an economic evaluation of the system along with a technical verification of the various components. Thus, the end customer gains a tailor-made PV system and the installation engineers save valuable time.

FlashviewProfessional plant presentation free of charge

Yields, current output, environmental and ambient data: Flashview presents solar plants on an ordinary display attached to a PC. Different display views either switch automatically or can be manually selected by the viewer. Flashview queries the plant data from Sunny WebBox via an existing network connection – optionally via the Internet from any location in the world. And you can integrate images of your own plant as well as external RSS feeds.

SUNNY DATA CONTROL
Everything under Control

Sunny Data Control is the ideal addition for system monitoring with Sunny Boy Control and a PC. The free software archives the data from the data logger long-term on the PC, evaluates and presents it visually on the monitor.

A further advantage: Sunny Data Control can be configured to directly communicate with your inverter and a PC. Thus it is possible to set your system's parameters without a data logger.

SMA Solarchecker
– Does Solar Power on My Roof Make Sense?
iPhone-App for estimating the yield of PV plant.

"Is it worth having a photovoltaic plant on my roof?" A question that many home owners are asking themselves. Specialists who own an iPhone 3GS can reply in just a few seconds – thanks to the Solarchecker from SMA. The application for the iPhone estimates the possible current yield of a PV plant in no time at all – directly on site.

How to find SMA ?
ADRESS
SMA America, LLC
6020 West Oaks Blvd
Rocklin, CA 95765 U.S.A.

Tel. +1 916 625 0870
Fax +1 916 625 0871
Toll Free 1-888-4SMAUSA

info@SMA-America.com
www.SMA-America.com

SOLAR SERDAR
solarserdar@gmail.com

SOLAR SERDAR recommends SOLON SE

SOLAR SERDAR recommends SOLON SE

Energy from the sun.
The amount of energy our sun gives us every single day is equivalent to 2,850 times our worldwide energy needs. Depending on the region, around 1000 watts of sunshine per square meter reach the ground. Just what an inconceivable amount of energy this is becomes clear when you consider that the sun could meet one year’s worth of our global energy needs in just three hours. One thing is clear: we must take advantage of that.

Company.
SOLON SE is one of the largest solar module manufacturers in Europe and a leading supplier of photovoltaic systems for large-scale solar power plants. The SOLON Group has subsidiaries in Germany, Austria, Italy, Switzerland, and the U.S. The SOLON Group's core business is the manufacture of solar modules in various performance categories and of complete photovoltaic systems for the construction of solar power plants as well as the construction of turn-key solar power plants worldwide.SOLON SE was founded in 1997 and went public in 1998, making it the first listed solar energy company in Germany.

Group revenue for 2009 was € 354 million. SOLON employs about 900 people group-wide. More than half of revenue is generated outside Germany. SOLON anticipates a further significant growth for the coming years.

The company's success is driven by its passion for ecological change. This passion for a sustainable future is summarized in SOLON's central mission statement:

"We are passionate fighters for ecological change in the energy market. We revolutionize the usage of solar energy with our innovations. We are: The Pioneers of Power."More info at solarserdar@gmail.com.

How your power plant works.

1. Modules
SOLON photovoltaic modules consist of several interconnected solar cells made of the semiconductor silicon, which have a poly- or monocrystalline structure depending on the production technique used. A solar cell’s silicon is doped differently on the front and rear sides to create one positive and one negative charge carrier surplus, producing an electrical potential at the junction of the two differently doped layers. When sunlight strikes the solar cells, the silicon begins conducting and voltage is generated across the cells’ metal contacts, creating direct current.

2. Inverter
Direct current created in the solar cells cannot be fed directly into the public grid: an inverter converts direct current into 230-volt alternating current so that it can be used normally.

3. Export meter
You can use the produced energy in your own home or feed it inot the grid. Grid-connected plants require an export meter that measures the energy fed into the grid in kilowatt hours (kWh).

4. Public grid
The alternating current created and fed into the public grid can then be used by all consumers.

How to become an electricity producer.
A solar plant from SOLON pays for itself in three different ways: it converts free solar radiation into valuable electricity, protects our environment and gives you a high-yield capital investment for decades of high returns. All with low operating costs and without added risk. You could call that a real investment for the future.More info at solarserdar@gmail.com.

Project development.
Our specialist partners will put you in touch with a SOLON installer in your area. He or she will perform a general assessment to determine the suitability of your home by using your house’s building plans or through an on-site appointment. If the result is positive, a yield simulation and subsequent profitability analysis for your roof will be performed. Many SOLON installers will also be able to help you hold any necessary discussions with the bank and public authorities.

Planning and construction.
As no roof is identical to another, your pv system will be planned individually. During installation, the installer will be your expert contact person when it comes to construction management, scheduling and installation.

Opertion and service.
As soon as all work has been completed, your solar power plant can be connected to the public power grid. That means it is time to sit back and enjoy the sun!

In many countries you will also enjoy these exclusive benefits with your SOLON solar insurance*:
Loss-of-production coverage when exchanging the inverter
Reimbursement of all costs incurred in connection with roof repairs resulting from damage to the PV system (e.g. caused by snow pressure)
Cost coverage (removal and reinstallation costs, transport and storage costs) as well as reimbursement for loss of output in the event of removal of an undamaged system

* Applies to Germany, Spain, Italy, Portugal, Denmark, Poland, the Czech Republic, Austria, France, Luxemburg, Belgium, Finland, Sweden and the Netherlands.More info at solarserdar@gmail.com.

Quality is in the details.

A solar power system is a long-term investment that should generate returns for at least 30 years. SOLON solar power systems are known for setting new standards of longevity. When developing our products, we do not just rely on the use of high-quality materials and innovative technology, but also on years of experience and the expertise of leading solar experts throughout Europe and the US. Strict controls throughout the entire production process ensure the outstanding quality of our modules. This is why SOLON is continually setting new standards when it comes to reliability, performance and quality.

Cell technology. Reliable and efficient.
Use of the latest cell technology from the world’s leading manufacturers
High efficiency and excellent low-light performance
Frame. Stable and long-lasting.
42 mm durable anodized aluminum twin-wall frame profile
Drainage holes for outstanding weather-resistance
Solar glass. Ultra transparent and robust.
Ultra hardened, low-reflection 4 mm solar glass
Excellent transparency for optimum yields
Quality connection boxes. Resilient and safe.
Meeting the highest safety standards
SOLON Advantages.

What makes SOLON different from other solar module producers? It is very simple: SOLON offers more. Better value, better service, better performance.

We are a listed company and know very well that green investment must provide a good return.

Solar does not equal solar.
Many companies work in the field of photovoltaics, but only a few can equal our comprehensive know-how and experience in the field of power-plant construction and module production.

SOLON solar insurance.
In all European countries and in Switzerland, SOLON rooftop systems are covered by a two-year SOLON insurance policy.
Specialist partners.

If you are looking for the highest quality when choosing a photovoltaic system, there is no room for compromise when it comes to consultation and installation quality. Installers of SOLON modules receive comprehensive training directly from us. With extensive consultation and achievement of the highest quality, you can enjoy your PV system for many years to come and ensure your investment will be secure and profitable for just as long. Looking for a SOLON installer close to you? We will be happy to provide you with the contact information for an installer in your vicinity.

SOLON specialist partners.
First-class products require first-class partners: SOLON products are sold by selected specialized dealers and installed by experts.

SOLAR SERDAR - Solar technology FAQs:

What is photovoltaics?
Photovoltaics is the direct conversion of solar energy into electric current using solar cells.

How do photovoltaics work?
When light strikes a solar cell, it creates an electric voltage between the surface facing the light and the surface turned away from the light. When the electric circuit is closed, electric current flows. (Source: DGS)
What does a solar power system consist of?
The base unit of a PV system is the solar module. Several modules are connected to a solar generator. Because the generator creates direct current, it requires an inverter to convert the direct current into alternating current for standard electrical applications. The electricity is then fed into the public power grid via a meter.
What is a module made of?
The main components of the modules are the solar cells. Several of these cells are combined into one module. The module is then laminated in a plastic layer and framed between a glass cover plate and a rear panel.
What steps are involved in the value creation chain for module creation?
Silicon raw material is derived from silicon-rich rock (e.g. sand). The silicon is melted to form blocks known as ingots. The ingots are then cut into paper-thin discs called wafers. The wafers are then used to make solar cells that form the main constituent of module production.
What kinds of PV systems are there?
In general, there are two different kinds of systems:
1. Structure
The most common type of mounting is the rooftop installation. This method makes particularly efficient use of space. Further mounting options include rooftop integration and building integrated systems.

2. Freestanding
Freestanding plants are systems that are mounted on the ground. The modules can be fixed or installed so that they track the sun.
How is a photovoltaic system different from a solar thermal system?
Instead of generating electricity from sunlight, a solar thermal system generates heat in the form of hot water or heat energy.

Use roof areas.
Many rooftop areas in industry and commerce are still unused.

What many companies do not know: they are losing promising additional income because rooftop photovoltaic systems can be used to generate extra profit.

Rooftop systems from SOLON.
A solar power system from SOLON is a profitable choice and a simple and safe investment. Our "all around carefree package" means that you do not have to worry about planning, construction or initial operation. SOLON and its partners will take care of all that.

Even after installation, everything has been arranged: a 10-year product warranty, a 25-year performance guarantee and integrated solar insurance are proof of that.
Highest performance during each phase of your project.
Solar systems on industrial and commercial buildings are a profitable business. In conjunction with our partners, we develop solutions that are custom-made for your requirements.

SOLON quality, which is renowned in this industrial sector, and our global references provide all the requirements for financing your project. SOLON is a listed company and therefore provides two essential benefits: transparency and financial strength.

Step by step to a sustainable investment.

SOLON can be your experienced partner. From planning to a turnkey solar plant. See for yourself: we have compiled a brief description of the most important project phases to give you an impression of a typical SOLON project:
Project development.
You have chosen a rooftop photovoltaic system and thus a sustainable investment. Congratulations - also to the environment!
First we check whether your roof is suitable for a photovoltaic system. We then make some profit simulations and economic analyses. At your request, our experts will also support you in discussions with banks and the authorities.
Planning and construction.
No roof is like another. Your system will therefore be individually planned and custom-made for your roof. During the building phase, too, you can fully rely on us: we monitor construction management, ensure that all components are delivered on time and check their proper installation.
Operation and service.
Once your solar power plant has been completed, we will connect it to the power grid. You will also benefit from comprehensive SOLON service after the initial operation: this includes monitoring the plant on site and from anywhere in the world via the Internet and technical operating support, including maintenance, inspection and repair of your system.
You can see: with SOLON you are on the safe side. We are so convinced of the reliability of your system that we will provide you with two years’ solar insurance* free of charge.

Contact.

SOLON SE

Am Studio 16
12489 Berlin • Germany
Phone: +49 30 81879-0
Fax: +49 30 81879-9999

More info at solarserdar@gmail.com
http://solarserdar.wordpress.com
http://solarserdar.blogspot.com
SOLAR SERDAR

SOLAR SERDAR *RENEWABLE ENERGY FAIRS / EVENTS

"NO ENERGY LIKE FREE ENERGY"
SOLAR SERDAR

November
DSC-IC 2010
... November 1 - 4; Cheyenne Mountain Resort; Colorado Springs, CO
The conference will bring together scientists, engineers, industrialists and investors in dye-sensitized solar cells (DSSC) technologies to discuss latest innovations in and applications for the progress of DSSC commercialization for technology.
Contact: Danielle Marks
Sponsor: IntertechPira
Phone: (207) 781-9637
Fax: (207) 781-2150
E-mail: danielle.marks@pira-international.com
Web site: www.dsc-ic.com

Advanced Energy Conference 2010
November 8 - 9; New York Hilton; New York City, NY
The conference will comprise national keynote speakers from DOE, DHS, NIST, NYSERDA and others on both days. A poster session will also accompany the 228 international, national and state energy leaders who are presenting this year.
Sponsor: AERTC
Web site: www.aertc.org/conference2010

OSEA Community Power Conference
November 14 - 17; Metro Toronto Convention Centre; Toronto, ON
This Ontario Sustainable Energy Association (OSEA)-hosted conference offers days of meeting and learning from community power experts, while the trade show displays the latest innovations in power generation technologies and services.
Contact: Tina Siegel
Sponsor: Ontario Sustainable Energy Association
Phone: (416) 972-7401
E-mail: tsiegel@ecostrategy.ca
Web site: www.cpconference.ca

December
PV Power Plants 2010 USA
December 1 - 2; Caesar's Palace Conference Center; Las Vegas, NV
This conference hosts industry leaders, focuses on large-scale solar power plants and aims to provide knowledge for decision-makers striving for a comprehensive understanding of the latest technologies, and market and industry developments.
Sponsor: Solarpraxis
Web site: www.solarpraxis.de/en/conferences

SEE Solar Energy 2010
December 3; Hotel Anel; Sofia, Bulgaria
This conference will review the current market situation of solar energy in southeast Europe, the DESERTEC initiative, and the future of solar energy regarding EU’s 2020 set targets, and provide a detailed look into Bulgaria, Turkey and Greece.
Sponsor: EastEuro Link
E-mail: london@easteurolink.co.uk
Web site: www.easteurolink.co.uk/see-solar

CanSIA Annual Conference & Exposition
December 6 - 7; Metro Toronto Convention Center; Toronto, ON
The conference will comprise industry leaders, elected and government officials,and solar colleagues from Canada and abroad to discuss developments in solar technology.
Sponsor: CanSIA
Web site: www.cansia.ca

RENEX
December 9 - 12; Istanbul Expo Center; Istanbul, Turkey
This event will feature discussions on renewable energy resources, energy efficiency, water treatment and fluid control technologies, among other topics.
Contact: Ulli Hammer
Sponsor: Hannover Fairs USA
Phone: (609) 987-1202 x 205
E-mail: uhammer@hfusa.com
Web site: www.hfusa.com/renex

Intersolar India 2010
December 14 - 16; Bombay Exhibition Centre; Mumbai, India
The event will focus on the development of the Indian solar market, as well as on promoting targeted cooperation among industry, commerce, service providers and politics within this quickly developing market.
Sponsor: Solar Promotion International GmbH
Phone: 49 0723158598
Web site: www.intersolar.in

Energy INDIA
December 15 - 18; Bombay Exhibition Centre; Mumbai, India
The show will cover the aspect of energy from generation to application.
Contact: Ulrike (Ulli) Hammer
Sponsor: Hannover Milano Fairs India Pvt Ltd
Phone: 1 6099871202 x 205
E-mail: uhammer@hfusa.com
Web site: www.energy-india.org

February 2011
PV Rollout Conference
February 10 - 11; Omni Parker House; Boston, MA
The two-day conference comprises lectures and presentations from solar industry experts, enthusiasts, and companies.
Contact: Gabriele Struthoff-Mueller
Sponsor: OTTI
Phone: +49 9412968829
Fax: +49 9412968817
E-mail: gabriele.struthoff-mueller@otti.de
Web site: www.otti.de

SNEC PV POWER EXPO 2011
February 22 - 24; Shanghai New International Expo Center; Shanghai, China
This event - one of the largest international PV shows - will feature many industry leaders as speakers. More than 1,000 exhibitors and 100,000 attendees are expected.
Contact: Teresa Wen
Sponsor: Shanghai New Energy Industry Association
Phone: 86 15821149946
E-mail: teresa.wen@snec.org.cn
Web site: www.snec.org.cn/indexe.asp

March
Electrotech EURASIA
March 17 - 20; TBA; Istanbul, Turkey
The Energy, Electric and Electronic Technologies Fair will comprise various technologies in the field (i.e., electrical energy generation systems, combustion engines, and renewable energy).
Contact: Ulrike (Ulli) Hammer
Sponsor: Hannover-Messe International Istanbul
Phone: 1 6099871202 x 205
E-mail: uhammer@hfusa.com
Web site: www.win-fair.com/en/electrotech.html

April
HANNOVER MESSE Energy
April 4 - 8; TBA; Hannover, Germany
Attention will focus on conventional and renewable energy generation concepts, as well as on transmission and distribution technologies.
Contact: Ulrike (Ulli) Hammer
Sponsor: Deutsche Messe AG
Phone: 1 6099871202 x 205
E-mail: uhammer@hfusa.com
Web site: www.hannovermesse.de/energy_e

Exhibition For Renewable Energy & Environment
April 27 - 30; CICES; Dakar , Senegal
The International Exhibition for Renewable Energy and Environment in Africa is open to companies, organizations and others involved in the various sectors of renewable energies and the environment.
Contact: Ben Basse
Sponsor: EXCAF
Phone: +221 338251963
Fax: +221 338242191
E-mail: consulting-energy@hotmail.com
Web site: www.sinergie-afrique.com

More info at solarserdar@gmail.com
SOLAR SERDAR

http://solarserdar.wordpress.com/
http://solarserdar.blogspot.com/

SOLAR SERDAR - USE YOUR ROOF

SOLAR SERDAR - USE YOUR ROOF !!!
Solar energy is not only easy to use – it has the most power from all renewable energy forms. Just a small fraction of the solar radiation that hits the earth would be sufficient to cover world energy consumption. And that – at least with regard to primary energy costs – is free of charge: sunlight costs you nothing.

However, not only the quantity is impressive. Solar energy is particularly attractive due to its cleanliness. There are practically no emissions and no dangerous radiation. So it is well-suited to tackle current climatic problems.

In order to use solar energy, no new and complex technologies are needed that would probably make no contribution to generating energy in the near future, despite intense and costly research. Already today, largely matured technologies are available which allow efficient use of solar energy.

Last but not least: fossil fuels are becoming increasingly scarce and ever more expensive. At the same time, energy demand is continuously increasing, especially in the aspiring Asian nations. We can predict that this will have significant political, economical, and ecological consequences. Solar energy can be an efficient instrument to counteract this alarming development.
Over 95 % of today’s solar cells consist of the semiconductor material silicon. Semiconductors are materials whose electrical conductivity increases with the influx of light or heat.

For the production of solar cells, the silicon is doped. For this purpose, other chemical elements are added, either creating an electron surplus (n-conductive layer) or an electron deficit (p-conductive layer). If two differently doped semiconductor areas convene, a so-called space charge zone is created at the boundary layer (p-n transition).

In order to achieve the desired effect, the initial material is normally lightly p-doped and a thin surface layer heavily n-doped. This creates the space charge zone required for separating charge carriers.

The front contact is a metallic mesh, enabling the sunlight to penetrate the silicon between the contacts. Moreover, solar cells are coated with an anti-reflection layer, serving to protect the cell and to reduce energy loss resulting from reflection. This layer gives the solar cells their typical bluish black appearance.
As a home owner, you can take the opportunity to use your roof as a small power station – without any effort as all the work is done by the solar cells. Modules made by SOLAR SERDAR can be installed by several different means in various ways, making them extremely versatile.More info at solarserdar@gmail.com.

SOLAR SERDAR
solarserdar@gmail.com

SOLAR SERDAR - WORLD SUSTAINABLE ENERGY DAYS

The World Sustainable Energy Days, the largest annual conference in this field in Europe, offer a unique combination of events on sustainable energy production and use, covering energy efficiency and renewable energy sources for buildings, industry and transport.

Conferences - which presented the latest technology trends, outstanding examples and European strategies - and the "Energiesparmesse", an important energy exhibition, offer ideal opportunities to establish new partnerships. The conference makes an important contribution to awareness raising for green energy and energy efficiency.

Since 19 years, experts and decision makers from all over the world flock to Upper Austria to attend the events - in the last 12 years, the conference attracted more than 10,000 participants from 98 countries!
Pellets are a clean, CO2-neutral and convenient fuel with growing market shares worldwide. The European Pellet Conference in Wels/Austria aims to provide in-depth information on pellet technologies, innovation and market trends. It will also offer an exciting platform to discuss new co-operation projects.

With more than 600 participants every year, the European Pellet Conferences held in Wels have become the largest annual pellet event in the world.

The conference is organised by O.Ö. Energiesparverband, the regional energy agency of Upper Austria, dedicated to sustainable energy market development. Upper Austria is an ideal location for such a conference. The region is home to a number of Europe‘s leading biomass boiler producers, and pellet heating systems have become a standard solution. More info at solarserdar@gmail.com.

Call for papers & speakers
Take the opportunity and share your work, achievements and insights with the world-wide pellet community!

Call for papers
Call for projects for the ”International Pellet Business Forum“
Propose a speaker
Topics:

R&D and technology innovation in fuels, distribution, equipment
innovative products, solutions, services, financing, marketing and business models
strategies, policies, legislation, programmes to develop pellet markets
market reports from local, regional, national pellet markets
standardisation and quality issues
improvements in costs, performance and consumer satisfaction
sustainability aspects along the value chain
raw materials, pellet production technologies
pilot projects, information and training
The papers will be presented in oral or poster sessions, accepted and presented contributions will be published in the proceedings.

Deadline: 05 October 2010


How to participate?


Please submit your contributions for the ”Call for papers & projects“ by E-Mail to office@esv.or.at, for proposing speakers, please use the online form.

The conference "Energy Efficiency Watch: Building Renovation" will present how public policies will contribute to triggering a renovation boom, financing models and technology solutions. It will showcase innovative examples of energy-efficient, economic and sustainable renovations of domestic, public and commercial buildings and for social housing and outline approaches towards zero energy renovations.

The event is organised in the frame of the IEE-project Energy Efficiency Watch II.


Call for papers & speakers
Take the opportunity and share your work, achievements and insights with the world-wide community! The following possibilities are available:

call for papers
propose a speaker
Topics:

renovation strategies for domestic, public, commercial buildings & social housing
technology innovation
financial instruments
policies & programmes
minimum performance requirements
cost-optimal renovation levels
National Energy Efficiency Action Plans
sustainability & durability & affordability
zero energy renovation
policies and programmes
best practice examples from around the globe
training & skills
The papers will be presented in oral or poster sessions, accepted and presented contributions will be published in the proceedings.

Deadline: 05 October 2010


How to participate?

Please submit your contributions for the "call for papers" by E-Mail to office@esv.or.at, for proposing a speaker, please use the online form.

We look forward to receiving your contributions!
More info at solarserdar@gmail.com.

While solar heat for domestic and service applications has increasing market shares across Europe, solar process heat is still in its infancy. The potential is enormous: about 30% of the total industrial heat demand is at temperature levels below 100°C which can be provided from commercially available solar thermal collectors.

The aim of the first ”International Solar Process Heat Conference“ is to present the technology solutions, market reports and best practice examples and to discuss strategies how to increase the market for solar process heat globally.

The conference is held in the framework of the Intelligent Energy Europe project ”Solar Process Heat“, www.solar-process-heat.eu

The conference is organised by O.Ö. Energiesparverband, the regional energy agency of Upper Austria, dedicated to sustainable energy market development.
Upper Austria as a leading solar thermal region in the world (0.7 m² solar thermal installed per capita) is the ideal location for this conference.


Call for papers & speakers
Take the opportunity and share your work, achievements and insights with the world-wide solar thermal community! The following possibilities are available:

call for papers
propose a speaker

Topics:

R&D and technology innovation for solar process heat
best practice examples from around the globe
analyses of potentials, application sectors, economics of solar process heat
collector innovation for solar process heat
system designs, planning tools & approaches, integration into commercial and industrial energy systems
solar heat metering, guarantee of results, quality assurance, solar contracting
market reports on solar process heat from local, regional, national markets
innovative products, solutions, services, financing, marketing and business models
information, awareness raising, training
strategies and programmes to develop solar process heat markets

The papers will be presented in oral or poster sessions, accepted and presented contributions will be published in the proceedings.


Deadline: 5 October 2010


How to participate?


Please submit your contributions for the ”call for papers“ by E-Mail to office@esv.or.at, for proposing a speaker, please use the online form.


We look forward to receiving your contributions!
More info at solarserdar@gmail.com.

Leading exhibition and trade show on energy efficiency and renewable energy sources - more than 1,600 exhibitors and more than 100,000 visitors.



02 - 03 March: Professional Visitor Days

04 - 06 March: General Public Days

General Information:
Organizer and location
Messe Wels GmbH & Co KG
A-4600 Wels, Messeplatz 1
Tel.: +43(0)7242/9392-0
Fax: +43(0)7242/9392-66451
e-mail: office@messe-wels.at
internet: www.energiesparmesse.at

Opening times
Exhibition: 04 - 06 March 2011

Professional Visitors Days:
02 - 03 March 2011
From 9 a.m. - 6 p.m. each day

SOLAR SERDAR
solarserdar@gmail.com

SOLAR SERDAR recommends SolarWorld

SolarWorld is the largest PV manufacturer in the U.S. and is currently building its network of installers across the country. Our modules are completely Made in the USA (98.6%) and lead the competition on energy production based on independent studies.
How a PV cell makes electricity

Under the sun, a photovoltaic cell acts as a photosensitive diode that instantaneously converts light – but not heat – into electricity.

Cell Layers

A top, phosphorus-diffused silicon layer carries free electrons – unanchored particles with negative charges. A thicker, borondoped bottom layer contains holes, or absences of electrons, that also can move reely. In effect, precise manufacturing has instilled an electronic imbalance between the two layers.

Sun Activation

Photons bombard and penetrate the cell.
They activate electrons, knocking them loose in both silicon layers.
Some electrons in the bottom layer sling-shot to the top of the cell.
These electrons flow into metal contacts as electricity, moving into a circuit throughout a 60-cell module.
Electrons flow back into the cell via a solid contact layer at the bottom, creating a closed loop or circuit.
SolarWorld manufacturers solar panels entirely in the USA from raw silicon to completed solar panels. This process involves four main steps: crystal growing, wafering, solar cell production and solar panel assembly. Learn about each of the four steps below.

Crystal growing
Wafering
Solar cell production
Solar panel assembly
SolarWorld heats and melts polysilicon rock until it forms a whitehot liquid, then re-fuses the molten silicon into a single giant crystal in which all atoms are perfectly aligned in a desired structure and orientation.

Charging

The magic starts with about 250 pounds of polysilicon rocks carefully stacked in a quartz crucible. The only other ingredient is a silicon disk impregnated with a tiny amount of boron. The addition of the oron dopant ensures that the resulting crystal will bear a positive potential electrical orientation. The crucible is encased within thick walls of insulating graphite and locked inside a cylindrical furnace.More info at solarserdar@gmail.com.





Melting

As the crystal-growing furnace heats up to temperatures ranging around 2,500 degrees Fahrenheit, its silicon contents melt into a shimmering slurry. Once computerized monitors register the right temperature and atmospheric conditions, the alchemy begins. A silicon seed crystal, hung from a narrow cable attached to a rotary device atop the furnace, is slowly lowered into the melt.

Growing

The crucible starts to turn, and the seed crystal begins to rotate in the opposite direction. The silicon melt freezes onto the seed crystal, matching the seed’s crystalline structure. The crystal grows, the cable and seed slowly ascend, and the crystal elongates at a controlled width. As the growth depletes the silicon slurry, the crucible also rises.

Cooling

Flash forward about 2.5 days since the crucible was charged with polysilicon: After hours of cooling to about 300 degrees Fahrenheit, the furnace hood and shaft lift away from the crucible encasement, slowly swing to one side and reveal a completed cylindrical crystal, ready to move to the second step and next production room.
A silicon crystal must change shape several times before it winds up as the precisely calibrated wafers that form the foundations of photovoltaic cells.





Cutting

First, a saw cuts off the crystal’s so-called top and tail, so that a crystal of uniform width remains. Typically, wafering saws draw thin wire bearing a liquid abrasive across the crystal’s surface. (Below, a machine mounted with a giant donutlike steel blade does the cutting.) Wire saws also cut the crystal into ingots measuring 2 feet or less. Steel holders are mounted on the ends of these ingots for the next step.



Squaring

Mounted ingots are placed standing on end in a rack bearing 16 at a time inside another wireslicing machine. There, wire running in a lattice configuration descends on the ingots to shear off four rounded segments, leaving flat sides. The result: The ingots now have a square crosssection, except for still-rounded corners.

Slicing

The next wire saw is more intricate yet. A wire winding hundreds of times between two cylindrical drums forms a web of parallel, tightly spaced segments. As the wire unspools through the machine, ingots mounted sideways on glass and metal holders are pressed two at a time through the wire web, slicing them into the thickness of slim business cards. Each millimeter of crystal yields about 21/2 wafers. Detached from their holders, the wafers are loaded into carriers, or boats, for transport to the next step.
Converting wafers into cells

At this point, a wafer is no more capable of producing electricity than a sliver of river rock. The wafer is the main building block of a PV cell, but so far its only notable characteristics are its crystal structure and positive potential orientation. All of that changes in the third, multistep, cell-production phase of PV manufacturing.More info at solarserdar@gmail.com.

Etching

In the only phase requiring a designated clean room, a series of intricate chemical and heat treatments converts the blank, grey wafers into productive, blue cells. A so-called texture etch, for instance, removes a tiny layer of silicon, relying on the underlying crystal structure to reveal an irregular pattern of pyramids. The surface of pyramids – so small they’re invisible to the naked eye – absorbs more light.

Diffusing

Next, wafers are moved in cartridges into long, cylindrical, ovenlike chambers in which phosphorus is diffused into a thin layer of the wafer surface. The molecular-level impregnation occurs as the wafer surface is exposed to phosphorus gas at a high heat, a step that gives the surface a negative potential electrical orientation. The combination of that layer and the boron-doped layer below creates a positive-negative, or P/N, junction – a critical partition in the functioning of a PV cell.

Coloring and Printing

The burgeoning, still-grey cells move in trays into heavy vacuum chambers where blue-purple silicon nitride is deposited onto their tops. The coating with silicon nitride – yet another member of the silicon family of materials – is designed to reduce reflection even further in the energy-dense blue end of the light spectrum. It leaves the cells with their final, dark color. Now, the cells can optimally gather photons and produce electricity. They lack, however, any mechanism to collect and forward the power. So, in a series of silkscreen- like steps, metals are printed on both sides of the cell, adding pin-stripe "fingers" and bus-bar circuitry. A functioning cell is born – only sunshine needed.
Stringing cells into solar panels

Each phase of production depends on processes with flavors all their own. Careful control of heating and cooling dominates crystal growing. Wafering employs abrasion and cutting. Cell production concentrates on chemistry. Any factory process would be incomplete without a final assembly step, and in PV such a step is known as moduling.

Soldering

At SolarWorld, module manufacturing is a highly automated process, relying on robust steel robotics to undertake the increasingly heavy lifting of assembling lightweight PV cells into modules weighing around 45 pounds apiece. Each robotic tool works within a safety fence that, by design, excludes people. First, cells are soldered together into strings of 10, using an over-under-overunder pattern of metal connectors to link the cells. Six strings are laid out to form a rectangular matrix of 60 cells. Each matrix is laminated onto glass.

Framing

To become a module, however, each laminate requires not only a frame to provide protection against weather and other impacts but also a junction box to enable connections among modules or with an inverter-bound conduit. Robots affix those, too.

Inspection and Shipping

Careful cleaning and inspection provide final touches before each module can be palletized for delivery to homes and businesses.


We seek both seasoned solar installers as well as new contractors interested in entering the market. If customer service, quality installation, and partnering with the best are key to your business strategy, then we want to hear from you.More info at solarserdar@gmail.com.

As more and more states adopt solar incentives the U.S. solar market is rapidly expanding beyond California. Companies that enter now will be well positioned to grow as the U.S. solar market expands over the next 5 years.
Sunkits® solar electric systems
Sunkits makes it simple for you. SolarWorld custom designs each Sunkits system for your customers needs and provides you with a detailed proposal.
Training
Receive the training that you need to get you solar business started or to take you company to the next level.

Marketing materials
Save money on producing your own materials with SolarWorld brochures, data sheets and more.

Sales leads
Grow your business with additional leads direct from SolarWorld.

SolarWorld exclusive financing
Offer your customers a variety of options to pay for their solar array.

SolarWorld Authorized Installer Logo
Gain credibility by using the SolarWorld Authorized Installer logo on your web site and marketing materials.

Co-marketing
Receive additional marketing support as you grow your business.
SolarWorld is seeeking both experienced solar installers as well as other companies interested in getting into solar, such as electrical and HVAC companies.

Basic knowledge of solar PV
Required licensing and insurance per your region
Professional customer service
Becoming a SolarWorld installer is easy. Simply follow these steps to get started:

Step 1: Complete the online inquiry form.

Step 2: Attend the Sunkits® webinar.

Step 3: Complete formal registration form.

Step 4: For installers new to solar PV, attend a local hands on training.

Step 5: Start installing!

Straightforward security
Because SolarWorld produces the highest quality, we can guarantee the best performance. That's why SolarWorld is the first solar company to offer a 25-year linear performance guarantee* for all modules installed after January 1, 2010.
SOLAR SERDAR
solarserdar@gmail.com

SOLAR SERDAR recommends CONERGY USA

SOLAR SERDAR recommends CONERGY USA
Conergy is one of the world’s largest solar energy companies and offers a broad range of products for on-grid and off-grid applications. We work with a select group of manufacturers and our own team of over 300 product engineers and product support specialists to continuously drive innovative design in each of our major product areas.

Solar-power installations on private homes and businesses, as well as the world's largest solar plants worldwide, are producing clean energy with Conergy components. Conergy offers solutions for both off-grid and grid-connected installations. In homes where the connection to the public electricity grid would be too costly or complicated, a photovoltaic installation can be your first choice because of its quiet and nearly maintenance-free operation.More info at solarserdar@gmail.com.

The modules, electrical components, and mounting systems we offer are specifically designed to meet the requirements of the market and are available exclusively from professional wholesalers specializing in renewable energy.
Solar energy systems reduce up to 100% your electricity costs, depending on system size. Utility prices are only going up every year. Solar energy provides you security from rising electricity rates.

A solar electric system adds value to any home or building and pays for itself for years to come. And, your solar system adds value without increasing your property taxes.
Solar is an environmentally responsible technology. Unlike fossil fuels, it does not emit pollutants which create harm to people and the environment.
The current state and federal incentives for solar can save up to 80% of your system cost. State rebates can drop every six months, so make your reservation now!
It is a proven technology with panels that are backed by a 25-year manufacturer warranty
Is Solar Right For Me?

Solar is right for most every home, depending on your motivation. Are you interested in solar purely for economic benefit? Are you concerned for our environment or the social responsibility of your business? Are you concerned for our environment or the future health of your family? Are you bothered by the fossil fuel situation and wish to declare your energy independence? All of these are great reasons to go solar! Below are a few limiting factors to getting the most out of your solar electric system:

Do you have a south-facing area of roof or land that can accommodate your solar system?
A south facing roof is going to provide the optimum potential for your system. Depending on your building orientation, other directions can also provide sufficient production; please consult us for these details.
Do you have unobstructed space available for your system?
Each kilowatt (kW) of solar contracted will cover approximately 100-150 sq. ft. of area. This can be a roof, parking structure, ground area, etc. If you do not have ample, unshaded, structurally sound area for solar, then your property may not be well-suited for solar.
Do you have any daytime shading issues on your south-facing space?
Trees, neighbors with larger buildings, vents, or other factor that cause shading throughout the day will cause significant decreases to your power production, therefore not making a suitable building for solar.
Will you need to repair or replace your roof in the next 5 years?
If so, then you may want to wait to add your solar system during that time, or consider re-roofing now to add your system.
Toll-free: 888-396-6611
Fax: 505-473-3830
Email: info@conergy.us
Headquarters:
2480 West 26th Avenue, Suite 2-B
Denver, CO 80211

Distribution Sales Group:
2480 West 26th Avenue, Suite 2-B
Denver, CO 80211

2000 Randolph Road SE, Suite 105
Albuquerque, NM 87106
Projects Group:
101 Lindenwood Drive, Suite 130
Malvern, PA 19355

3550 Watt Avenue, Suite 140 #4
Sacramento, CA 95821

SOLAR SERDAR
solarserdar@gmail.com

SOLAR SERDAR preporuča UGO d.o.o.(croatian text)

SOLAR SERDAR

preporuča solarni program firme UGO d.o.o. iz Crikvenice

Vakumski kolektori

Solarni kolektor 50*1800 – 20

MPC 4.700,00 kn




Solarni kolektor 50*1800 – 15

MPC 3.500,00 kn

Spremnici


Spremnik 200L

MPC 5.700,00 kn




Spremnik 150L

MPC 5.100,00 kn

Solarni sistemi (Voda)


Solar sistem 200L

MPC 14.714,24 kn



Solarni sistemi (Voda)

Solar sistem 300L

MPC 13.850,00 kn

Niskotlačni solarni sistem


Solarni sistem N-200L

MPC 3.800,00 kn



SECUterm 200 FS


Kolektor 1 x C32

Spremnik 200L


MPC 15.053,00 kn

Cijene obračunate po tečaju na dan 21.06.2010. i obračunavaju po tečaju na dan kupnje

Garncija na kolektore 10 godina, na spremnike 5 godina



Solar set voda

4 osobe


BWB 410 AD


Kolektor 2 x C32

Spremnik 300L


MPC 21.104,31 kn

Cijene obračunate po tečaju na dan 21.06.2010. i obračunavaju po tečaju na dan kupnje

Garncija na kolektore 10 godina, na spremnike 5 godina



Solar set voda + grijanje


SH 960 AD


Kolektor 4 x C20

Spremnik 700L


MPC 52.572,00 kn

Cijene obračunate po tečaju na dan 21.06.2010. i obračunavaju po tečaju na dan kupnje

Garncija na kolektore 10 godina, na spremnike 5 godina



WattSU 300L solarni sistem


2 x WATT 3000S pločasti kolektor


HT 300 ERR spremnik sa dvostrukim izmjenjivačem


Nosači (aluminijski) za krov


Tekućina 20L


ReSolWATT II kontroler


Ekspanzona posuda 18L


MPC 18.001,80 kn

Cijene obračunate po tečaju na dan 21.06.2010. i obračunavaju po tečaju na dan kupnje

Garncija na kolektore 10 godina, na spremnike 5 godina

Sjedište:

Ugo d.o.o.

Gornja Draga 42

51260 Crikvenica

MB: 3703657

OIB: 35541129347

Žiro- račun: 2402006-110039352



Solarna energija– alternativni izvori

Prodaja, montaža i servis

Poslovnica Rijeka

Adresa:

Mavrinci 19,

51219 Čavle

Tel/Fax: 051/250-047

Mob: 098/390-839

E-mail: ugo@ugo.hr





Zatražite ponudu koja će odgovarati Vašim potrebama kako bi Vaša potrošnja energije čim prije postala besplatna i ekološki učinkovita,a naše osoblje odgovoriti će Vam u što kraćem roku.
SOLAR SERDAR
solarserdar@gmail.com